---This Rail fits non-scalloped recievers with a factory drilled and tapped receiver---

A dovetail to Picatinny adapter for the Anschutz *54 22lr action built by shooters for shooters. We asked, and then listened to your suggestions and came up with what we think most shooters can use. Made from 6061 billet on CNC milling machines. Same length as the Anschutz 54 receiver.

Note:
Will not fit square actions or Match actions
This product was manufactured by DIP INC

• PLEASE NOTE: All work or modifications to any firearm should ALWAYS be performed by a competent, qualified Gunsmith. Please follow ALL NRA safety rules!
• Follow ALL NRA safety rules!
• On some model rifles you may need to remove the bolt(see owners manual). Align the Mount up with the dovetail slots and slide the Mount onto the receiver. Center the Mount over the ejection port, apply a small amount of LocTite to the supplied screws and start all the screws into the receiver. Torque the set screws(1/16" Allen) or the supplied screws for the factory drilled and taped receivers to 5-7in lbs with a 5/64"(2mm) Allen wrench. Let set for 24hrs before use.