|
|
|
|
|
|
KNS Precision Replacement Trigger/Hammer Pins
|
Usually Ships in 24 Hours
MSRP: $6.00
JoeBob's Sale Price: $4.95
JoeBob dun saved you $1.05!
|
|
|
Rifle: AR-15, M-16. Sizes: Small .154 dia.; Small .1555 dia.; Large .170 dia. Stainless steel pins. Match grade stainless steel replacement pins for trigger and hammer. CNC machined for correct fit. The .1555 dia. pins are designed to tighten up worn receivers or to be installed in new receivers with match trigger sets to remove all free play. These will fit in new receivers without any machine work.(.1555 - will not fit Jewell Trigger System.)
|
|
|
|
|
|
|
|
|
|
Perma-Pin Firing Pin Retainer
|
Usually Ships in 24 Hours
MSRP: $8.00
JoeBob's Sale Price: $7.50
JoeBob dun saved you $0.50!
|
|
|
Replaces standard cotter pin found in the bolt carrier to retain the firing pin as in original Stoner rifles.
|
|
|
|
|
|
|
|
|
|
KNS AR15 M16 AR10 SR25 Round Dot Post Sight .034 - RND034
|
Usually Ships in 24 Hours
MSRP: $8.00
JoeBob's Sale Price: $7.95
JoeBob dun saved you $0.05!
|
|
|
Replacement front sight pin for AR-15 front sight post.
|
|
|
|
|
|
|
|
|
|
KNS AR15 M16 AR10 SR25 Square Post Sight .034 - SQ034
|
Usually Ships in 24 Hours
MSRP: $8.00
JoeBob's Sale Price: $7.95
JoeBob dun saved you $0.05!
|
|
|
Replacement front sight pin for AR-15 front sight post.
|
|
|
|
|
|
|
|
|
|
KNS 1 1/4" Quick Release Sling Swivels
|
Usually Ships in 24 Hours
MSRP: $12.00
JoeBob's Sale Price: $11.25
JoeBob dun saved you $0.75!
|
|
|
The 1 1/4" quick release swivels are made of steel with a phosphate finish. These swivels are the correct size and finish for all AR-15 type rifles. These swivels are designed for use with 1 1/4" slings and are specially made for those who want correct size and finish swivels on AR-15 rifles. For use with our front and rear swivel mounts and they also attache to any standard swivel mount stud.
These include (2) sling swivels per package.
|
|
|
|
|
|
|
|
|
|
KNS Pivot Pin with Sling Stud
|
Usually Ships in 24 Hours
MSRP: $15.00
JoeBob's Sale Price: $12.95
JoeBob dun saved you $2.05!
|
|
|
This steel pivot pin with sling swivel mount and oxide finish replaces standard front pivot pin and is available in .250 or .315 diameter. Use with quick release sling swivels. Increases match accuracy be eliminating all tension on barrel and upper receiver when shooting with sling.
|
|
|
|
|
|
|
|
|
|
KNS Quick Release Front Sling Mount
|
Usually Ships in 24 Hours
MSRP: $15.00
JoeBob's Sale Price: $13.50
JoeBob dun saved you $1.50!
|
|
|
Front sling mount for quick release sling swivels requires no modification to gun. Fits all floating & non-floating handguards. This sling mount attaches through top or bottom vent holes in standard hand guard and allows for the quick removal of the sling when cleaning or when upper and lower receivers are separated. The parts are all steel with a black phosphate finish.
|
|
|
|
|
|
|
|
|
|
KNS Rear Sling Mount
|
Usually Ships in 24 Hours
MSRP: $15.00
JoeBob's Sale Price: $13.50
JoeBob dun saved you $1.50!
|
|
|
The rear sling mount is made of steel with a black phosphate finish and will attach to an AR15, M16, and MOST carbines with no modifications to the rifle. The rear sling mount features a quick release and will fit some CAR stocks. It replaces the rear sling loop and attaches with original bottom butt plate screw. This allows quick removal of sling when receivers are separated.
|
|
|
|
|
|
|
|
|
|
KNS Push Button Take Down Pin .250 dia.
|
Usually Ships in 24 Hours
MSRP: $17.00
JoeBob's Sale Price: $15.95
JoeBob dun saved you $1.05!
|
|
|
This .250 diameter take-down pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls. The steel has a black oxide finish. The button also has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns internals.
|
|
|
|
|
|
|
|
|
|
KNS Push Button Pivot Pin .250 dia
|
Usually Ships in 24 Hours
MSRP: $17.00
JoeBob's Sale Price: $15.95
JoeBob dun saved you $1.05!
|
|
|
This large hole receiver pivot pin, designed for quick and easy removal, fits the AR-15 and M-16 The pin is .250 in diameter and is made of steel and has a black oxide finish. This pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls. The button has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns internals.
|
|
|
|
|
|
|
|
|
|
KNS M10 Push Button Take Down Pin-M10PBTD
|
Usually Ships in 24 Hours
MSRP: $20.00
JoeBob's Sale Price: $17.95
JoeBob dun saved you $2.05!
|
|
|
M-10 semi-auto and sub machine gun. Parts are steel with black oxide finish. This take-down pin has a spring loaded push button. When pushed, the three stainless steel keeper pins retract for easy pin removal. The pin is designed to replace the original two-piece front pin. Now you can quickly separate the upper and lower receivers without using an additional tool.
|
|
|
|
|
|
|
|
|
|
KNS M11 Push Button Take Down Pin-M11PBTD
|
Usually Ships in 24 Hours
MSRP: $20.00
JoeBob's Sale Price: $17.95
JoeBob dun saved you $2.05!
|
|
|
M-11 semi-auto and sub machine gun. Parts are steel with black oxide finish. This take-down pin has a spring loaded push button. When pushed, the three stainless steel keeper pins retract for easy pin removal. The pin is designed to replace the original two-piece front pin. Now you can quickly separate the upper and lower receivers without using an additional tool.
|
|
|
|
|
|
|
|
|
|
KNS Push Button Pivot Pin with Stud .250 dia.
|
Usually Ships in 24 Hours
MSRP: $20.00
JoeBob's Sale Price: $18.95
JoeBob dun saved you $1.05!
|
|
|
This pivot pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. Once the pin is in place, simply push the button and slide the stud over the retracting balls and release. Put your sling swivel into the stud and you are ready to place your sling on the rifle. This eliminates any weight on the barrel of the weapon. When sling swivel is inserted in the stud, the stud is locked onto the pin. You must remove the sling swivel from the stud in order to remove the stud from the pin.
|
|
|
|
|
|
|
|
|
|
KNS Precision's Turned Lower Parts Kit
|
Usually Ships in 24 Hours
MSRP: $20.00
JoeBob's Sale Price: $18.95
JoeBob dun saved you $1.05!
|
|
|
Turned lower parts machined by KNS Precision, Inc. Kit includes:
Bolt Catch Detent
Buffer Detent
Two Pivot/Take Down Detents
Standard Take Down Pin
Standard Pivot Pin
Standard Hammer Pin
Standard Trigger Pin
Safety Detent
|
|
|
|
|
|
|
|
|
|
KNS SIG 556 Button Pivot Pin
|
Usually Ships in 24 Hours
MSRP: $20.00
JoeBob's Sale Price: $18.95
JoeBob dun saved you $1.05!
|
|
|
This pin is designed to replace the screw and nut on the front of the receiver. It features KNS Precision's ball detents for easy assembly and a solid locking mechanism. This pin features a black oxide finish to match the receiver, and stainless steel internals for corrosion resistance. This take-down pin has a spring loaded push button. When pushed, the three stainless steel keeper pins retract for easy pin removal. Now you can quickly separate the upper and lower receivers without using an additional tool.
|
|
|
|
|
|
|
|
|
|
KNS SIG 556 Button Pivot Pin with Swivel Attachment
|
Usually Ships in 24 Hours
MSRP: $24.00
JoeBob's Sale Price: $22.95
JoeBob dun saved you $1.05!
|
|
|
Push button pivot pin with a sling swivel attachment for the Sig 556 Rifle. Simple installation into rifle and even easier removal.
|
|
|
|
|
|
|
|
|
|
KNS Precision Gen2 Mod1 Trigger Group Pins-
|
Usually Ships in 24 Hours
MSRP: $33.00
JoeBob's Sale Price: $27.50
JoeBob dun saved you $5.50!
|
|
|
These are the Generation 2 pin sets. These are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-auto 9mm and .223 suppressed weapons. The pins are stainless steel pins. End retainers are black oxide, dark earth, or OD green. Connectors have phosphate finish. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Allen wrenches included. No modification to gun required.
The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. The .1555 will not fit Jewell Trigger System.
The .170 size fits late model Colts.
For Rock River National Match triggers use the .1555 only.
There is no strength difference between the Gen 2 and Gen 2 Mod 2 sideplates. The only difference is cosmetic.
|
|
|
|
|
|
|
|
|
|
KNS Precision Gen2 Mod 2 Trigger Group Pins
|
Usually Ships in 24 Hours
MSRP: $33.00
JoeBob's Sale Price: $27.50
JoeBob dun saved you $5.50!
|
|
|
These are the Generation 2 Mod 2 pin sets. They are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-automatic 9mm and .223 suppressed weapons.
The pins are stainless steel pins. End retainers are black oxide, dark earth, or OD green. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Allen wrenches included. No modification to gun required.
The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. The .1555 will not fit Jewell Trigger System.
The .170 size fits late model Colts.
For Rock River National Match triggers use the .1555 only.
There is no difference in strength between the Gen 2 and the Gen 2 Mod 2 side plates. The only difference is cosmetic.
|
|
|
|
|
|
|
|
|
|
AR15 M16 AR10 SR25 Crosshair Hooded Standard - ARHDST
|
Usually Ships in 24 Hours
MSRP: $33.00
JoeBob's Sale Price: $32.50
JoeBob dun saved you $0.50!
|
|
|
Sight Body Style - Hooded .240 aperture.
Crosshair Type - Standard.
Crosshair Size - .010 Diameter.
Crosshair Material - Heat treated.
Installation - Replaces post sight w/o modifications to gun.
|
|
|
|
|
|
|
|
|
|
AR15 M16 AR10 SR25 Crosshair Hooded Duplex - ARHDDU
|
Usually Ships in 24 Hours
MSRP: $33.00
JoeBob's Sale Price: $32.50
JoeBob dun saved you $0.50!
|
|
|
Sight Body Style - Hooded .240 aperture.
Crosshair Type - Duplex.
Crosshair Size - .010 / .020 Diameter.
Crosshair Material - Heat treated.
Installation - Replaces post sight w/o modifications to gun.
|
|
|
|
