|
|
|
|
|
|
ERGO AR Lower Spring Replacement Kit - 4612
|
MSRP: $6.30
JoeBob's Sale Price: $5.67
JoeBob dun saved you $0.63!
|
|
|
Nine piece kit inludes: Bolt Catch Spring, Disconnector Spring, Buffer Retainer Spring, Trigger Spring, Magazine Catch Spring, Hammer Spring, Selector Spring, two Detent Springs.
|
|
|
|
|
|
|
|
|
|
MILLETT BenchMaster Rifle and Pistol Window Rest System Black
|
MSRP: $21.95
JoeBob's Sale Price: $8.95
JoeBob dun saved you $13.00!
|
|
|
MIL BenchMaster Rifle and Pistol Window Rest System Black
BENCHMASTER WINDOW REST- Use as a brace for spotting scope, camera or binoculars on a car window. MILLETT rests secure to your car window in seconds, providing a soft cushion for your equipment. It s a great rest for your 35mm, spotting scope, or .22-250.
|
|
|
|
|
|
|
|
|
|
Kel-Tec PF9 +1 Mag Extension for PF9 - PF9-805
|
MSRP: $13.50
JoeBob's Sale Price: $12.95
JoeBob dun saved you $0.55!
|
|
|
Kel-Tec PF9 +1 Mag Extension for PF9 - PF9-805
These NEW +1 PF9 magazine extension were newly released in Spring of 2011.
These extensions will allow original, factory mags to hold one more round and are extended for a better grip.
|
|
|
|
|
|
|
|
|
|
Fulton Armory Charging Handle Tactical Latch-AMBI
|
MSRP: $14.95
JoeBob's Sale Price: $13.95
JoeBob dun saved you $1.00!
|
|
|
This latch is truly ambidextrous; it's for both left and right-handers!
No matter how awkwardly you might have to grab the charging handle, or with which hand, you'll be able to unlatch and rack the charging handle!
Your webmaster personally believes it's a "must" for your "go-to" rifle.
|
|
|
|
|
|
|
|
|
|
Spike's Tactical Melonited Black Mil Spec Gas Tubes
|
MSRP: $16.95
JoeBob's Sale Price: $15.95
JoeBob dun saved you $1.00!
|
|
|
Spike's Tactical has produced what we believe is the best gas tube out on the market for the AR-15 rifle. Our gas tubes are made out of Mil-Spec 304 stainless steel and then are Melonite coated for greater heat resistance, corrosion resistance, and lower reflection. These gas tubes are not only great for .223/5.56 uppers but are perfect for 5.45 uppers for when you shoot cheap surplus corrosive ammunition. These are the same gas tubes that we install on our ST-15 rifles and all of Spike's complete upper receivers.
Choose the appropriate gas tube length you want in the drop-down box below.
Pistol Length Part #:SUGT0M1
Carbine Length Part #:SUGT0M2
Mid Length Part #:SUGT0M3
ALL SPIKE'S GAS TUBES INCLUDE A GAS TUBE ROLL PIN
|
|
|
|
|
|
|
|
|
|
MAGPUL MOE AR GRIP K-*NEW*
|
|
|
Designed as a drop-in upgrade for the standard AR15/M16 pistol grip, The MOE-K Grip provides a low profile, compact design and steeper grip angle compared to more traditional styles.
With a more vertical grip angle optimized for use on PDW (Personal Defense Weapon) configurations, the MOE-K Grip improves comfort and control on rifles that bring the primary hand in closer to the shooter's body or body armor. The slim profile also makes it an excellent choice for shooters who prefer a smaller grip circumference.
All mounting hardware included.
|
|
|
|
|
|
|
|
|
|
KNS M10 Push Button Take Down Pin-M10PBTD
|
MSRP: $20.00
JoeBob's Sale Price: $17.95
JoeBob dun saved you $2.05!
|
|
|
M-10 semi-auto and sub machine gun. Parts are steel with black oxide finish. This take-down pin has a spring loaded push button. When pushed, the three stainless steel keeper pins retract for easy pin removal. The pin is designed to replace the original two-piece front pin. Now you can quickly separate the upper and lower receivers without using an additional tool.
|
|
|
|
|
|
|
|
|
|
KNS M11 Push Button Take Down Pin-M11PBTD
|
MSRP: $20.00
JoeBob's Sale Price: $17.95
JoeBob dun saved you $2.05!
|
|
|
M-11 semi-auto and sub machine gun. Parts are steel with black oxide finish. This take-down pin has a spring loaded push button. When pushed, the three stainless steel keeper pins retract for easy pin removal. The pin is designed to replace the original two-piece front pin. Now you can quickly separate the upper and lower receivers without using an additional tool.
|
|
|
|
|
|
|
|
|
|
MAGPUL MOE AR GRIP PLUS *NEW*
|
|
|
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15/M16 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included.
|
|
|
|
|
|
|
|
|
|
Magpul 10th Anniversary T-Shirt
|
|
|
Magpul 10th Anniversary fitted T-Shirt
Distressed style t-shirt with a faded look and worn edges. Features the 'roughed-up' Magpul logo on the left shoulder and our 10th Anniversary Logo on the lower right.
|
|
|
|
|
|
|
|
|
|
Magpul Branded Center T-Shirt
|
|
|
Magpul Branded Center fitted T-Shirt
For the purist, our classic design. Magpul Logo up front with the Magpul name on the back.
|
|
|
|
|
|
|
|
|
|
Magpul Branded Base T-Shirt
|
|
|
Magpul Branded Base fitted T-Shirt
Based on our fan favorite SHOT Show 2011 design, the Branded Base shirt has the Magpul logo running vertically up the front left.
|
|
|
|
|
|
|
|
|
|
MAGPUL MSA MOE SLING ATTACHMENT - MAG504 *NEW*
|
|
|
The MSA (MOE Sling Attachment) attaches directly to the MOE Hand Guard, providing a forward sling attachment point for the Magpul MS2, MS3 and other clip-in sling systems. Like the RSA™ the MSA is precision cast steel, and is Melonite finished for wear and corrosion resistance.
|
|
|
|
|
|
|
|
|
|
Spike's Tactical Charging Handle - Forged
|
MSRP: $23.00
JoeBob's Sale Price: $22.95
JoeBob dun saved you $0.05!
|
|
|
The Spike's Tactical Forged Charging Handle is a fully Mil-spec part which is standard equipment in all Spike's Tactical AR-15 rifles and uppers. It’s made of forged Aluminum and is topped off in a Mil-Spec Type-III Hardcoat Anodized finish.
|
|
|
|
|
|
|
|
|
|
RUGER 10/22 25rd Magazine, Stainless Steel Feed Lips-BX25- Ruger 90361
|
MSRP: $29.95
JoeBob's Sale Price: $24.95
JoeBob dun saved you $5.00!
|
|
|
This genuine Ruger factory magazine with Ruger logo has been tested and has proven to feed as reliably as the standard 10-round Ruger rotary magazine. BX-25 magazines will work with any factory original Ruger 10/22 rifle, SR-22 rifle, and 22 Charger pistol.
|
|
|
|
|
|
|
|
|
|
Kel-Tec PF9 8 Round EXTENDED Magazine - PF9-808
|
MSRP: $31.50
JoeBob's Sale Price: $29.95
JoeBob dun saved you $1.55!
|
|
|
Kel-Tec PF9 8 Round EXTENDED Magazine for the Keltec PF9- PF9-808
These NEW 8rd PF9 magazines were newly released in Spring of 2011.
These magazines will hold one more round over original, factory magazines.
|
|
|
|
|
|
|
|
|
|
Timney Trigger Tension Scale 8oz-10lbs -010
|
MSRP: $31.95
JoeBob's Sale Price: $29.95
JoeBob dun saved you $2.00!
|
|
|
These gauges are made to our exacting specifications. The Timney tension scale gives accurate, consistent pull weights from 8 oz to 10 lbs. and is calibrated in Kg weights as well. It includes a tattle-tail indicator and wide hook, and is compact and easy to store with your gear.
|
|
|
|
|
|
|
|
|
|
Spike's Tactical Heavy Duty Billet Charging Handle
|
MSRP: $33.00
JoeBob's Sale Price: $31.95
JoeBob dun saved you $1.05!
|
|
|
The Spike’s Tactical Billet Charging Handle is a drop in replacement for your standard Mil-Spec charging handle. It’s precision CNC machined from billet Aluminum to exact tolerances, features custom horizontal flutes around the handle for a better gripping surface, and we finished each one off with a Mil-Spec Type-III Hardcoat Anodized finish for durability.
|
|
|
|
|
|
|
|
|
|
Carlson's COYOTE CHOKE 12ga Remington Style Threads - 30044
|
MSRP: $39.95
JoeBob's Sale Price: $33.96
JoeBob dun saved you $5.99!
|
|
|
For use with Hevi-Shot, Bismuth or lead, this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes. Produces very dense patterns when ultilizing T and #4 Buckshot loads. Great for waterfowl and predator hunting. Fits Remington Style Threads
NOT FOR USE WITH STEEL SHOT
|
|
|
|
|
|
|
|
|
|
Carlson's COYOTE CHOKE 12ga Fits CRIO PLUS Systems - 30050
|
MSRP: $39.95
JoeBob's Sale Price: $33.96
JoeBob dun saved you $5.99!
|
|
|
For use with Hevi-Shot, Bismuth or lead, this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes. Produces very dense patterns when ultilizing T and #4 Buckshot loads. Great for waterfowl and predator hunting.Fits CRIO PLUS Systems
NOT FOR USE WITH STEEL SHOT
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Invector - Mid Range - 09060
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Winchester, Browning Invector, Mossberg 500 style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Invector - Extended Range - 09061
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Winchester, Browning Invector, Mossberg 500 style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Beretta/Benelli Mobil - Mid Range - 09062
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Beretta/Benelli Mobil style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Beretta/Benelli Mobil - Extended Range - 09063
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Beretta/Benelli Mobil style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Remington - MidRange - 09064
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Remington style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Remington - Extended Range - 09065
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Remington style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Browning Invector Plus - Mid Range - 09066
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Browning Invector Plus style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Browning Invector Plus - Extended Range - 09067
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Browning Invector Plus style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Mossberg 835&935 - MId Range - 09068
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Mossberg 835 & 935 style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Mossberg 835&935 - Extended Range - 09069
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Mossberg 835 & 935 style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Crio Plus - Mid Range - 09070
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Crio Plus style threads
|
|
|
|
|
|
|
|
|
|
Carlson's Blind Side 12ga Crio Plus - Extended Range - 09071
|
MSRP: $39.95
JoeBob's Sale Price: $36.95
JoeBob dun saved you $3.00!
|
|
|
This choke uses a special field-tested constriction and length to get the most form Blind Side Ammunition's new configuration. Carlson's Blind Side Choke Tubes allow Winchester Blind Side Hex Steel Shot and Diamond cut wad to do its job and helps deliver devastating downrange patterns. This choke tube performs equally well when used with other steel shot loads. Carlson's Blind Side Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances. This choke is also designed to shoot lead, plated copper and nickel shot, as well as all Hevi-Shot ammunition with great results.
Fits Crio Plus style threads
|
|
|
|
|
|
|
|
|
|
J&L RESEARCH AR-15/M16 DROP-IN TRIGGER ADJUSTER -072-000-001
|
MSRP: $44.20
JoeBob's Sale Price: $43.95
JoeBob dun saved you $0.25!
|
|
|
Trigger adjuster replaces the factory grip screw to reduce trigger creep, lessen pull weight, and improve hammer break for better accuracy. Use alone or as part of a complete trigger job.
One of the BEST upgrades possible for a mil-spec fire control group, period! Can be used to fine-tune any mil-spec trigger or even the Nickle Boron Spike's Tactical Trigger!
These can be used in combination to take the pre-travel out of a trigger and reduce the trigger pull weight utilizing the JP reduced power springs
SPECS: Stainless steel. Gunsmith fitting recommended but not required.
|
|
|
|
|
|
|
|
|
|
Carlson's Benelli Nova/Super Nova - 7-Shot Magazine Extension - 04502
|
MSRP: $50.95
JoeBob's Sale Price: $44.95
JoeBob dun saved you $6.00!
|
|
|
Add firepower to your favorite shotgun. These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower. The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine. Easy to follow instructions are included. The magazine extension tube is great for home protection, competition shooting, and law enforcement. See chart below for the make/model and the magazine capacity.
Fits: Benelli Nova/Super Nova
|
|
|
|
|
|
|
|
|
|
Carlson's Winchester 1200/1300 - 7-Shot Magazine Extension - 04503
|
MSRP: $50.95
JoeBob's Sale Price: $44.95
JoeBob dun saved you $6.00!
|
|
|
Add firepower to your favorite shotgun. These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower. The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine. Easy to follow instructions are included. The magazine extension tube is great for home protection, competition shooting, and law enforcement. See chart below for the make/model and the magazine capacity.
Fits: Winchester Winchester 1200/1300
|
|
|
|
|
|
|
|
|
|
Carlson's Remington 870,1100,11-87 Magazine Tube Extensions
|
MSRP: $53.95
JoeBob's Sale Price: $45.95
JoeBob dun saved you $8.00!
|
|
|
Add firepower to your favorite shotgun. These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower. The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine. Easy to follow instructions are included. The magazine extension tube is great for home protection, competition shooting, and law enforcement. See chart below for the make/model and the magazine capacity.
04500 Remington 870, Remington 1100, 11-87 - 8-Shot
04504 Remington 870/1100 - 10-Shot
|
|
|
|
|
|
|
|
|
|
Carlson's Benelli M1, M2, Super Black Eagle, Super Black Eagle II - 8-Shot
|
MSRP: $51.95
JoeBob's Sale Price: $45.95
JoeBob dun saved you $6.00!
|
|
|
Add firepower to your favorite shotgun. These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower. The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine. Easy to follow instructions are included. The magazine extension tube is great for home protection, competition shooting, and law enforcement. See chart below for the make/model and the magazine capacity.
Fits: Benelli M1, M2, Super Black Eagle, Super Black Eagle II
|
|
|
|
|
|
|
|
|
|
Carlson's Winchester SX2 & X3 - 8-Shot Magazine Extension - 04505
|
MSRP: $53.95
JoeBob's Sale Price: $47.95
JoeBob dun saved you $6.00!
|
|
|
Add firepower to your favorite shotgun. These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower. The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine. Easy to follow instructions are included. The magazine extension tube is great for home protection, competition shooting, and law enforcement. See chart below for the make/model and the magazine capacity.
Fits: Winchester SX2 & SX3
|
|
|
|
|
|
|
|
|
|
MS2™ - Multi Mission Sling System - MAG501
|
|
|
Driven by the operational experience of Magpul DynamicsSM instructors, the MS2 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS2 allows an operator to leverage the maneuverability of Single-Point® attachment for direct-action, or two-point attachment for stability. Single-hand adjustments, quick-detach lanyard and positive-locking metal hardware provide flexibility and durability in a truly adaptable sling system.
Used in conjunction with the Magpul ASAP® plate (sold separately), the MS2 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS2 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS2 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
MAGPUL MS3 Sling - 503
|
|
|
Driven by the operational experience of Magpul DynamicsSM instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of Single-Point® attachment for direct-action, or two-point attachment for stability. Single-hand adjustments, quick-detach lanyard and positive-locking metal hardware provide flexibility and durability in a truly adaptable sling system.
Used in conjunction with the Magpul ASAP® plate (sold separately), the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand.
The MS3 incorporates several new features over the MS2 including all new Magpul designed and built hardware for greater durability and compatibility.
Fast transition from one-point to two-point configuration
Adjustment Loop for rapidly adding or removing sling tension with a single-hand
Quick-release Paraclip™ shackles allows for easy transition and provides emergency weapon release capabilities
Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed
Light weight yet durable hardware made with hardened steel and heavy-duty polymer
Steel Paraclip levers are case hardened and finished with a ferritic nitrocarburizing process for extreme resistance to wear and corrosion
Special 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort Sling Mounting
REAR - Works with the Magpul ASAP® for optimal transitioning in one-point mode. Also compatible with many snap-hook style sling connectors and standard or QD sling swivels.
FRONT - Compatible with the Magpul RSA™, MSA™, many snap-hook style sling connectors, and standard or QD sling swivels for use in two-point mode.
|
|
|
|
