Home >

EGW Sig Sauer M17 / M18 Red Dot Sight Adapter Mount - Trijicon RMR / SRO - Blemished
EGW Sig Sauer M17 / M18 Red Dot Sight Adapter Mount - Trijicon RMR / SRO - Blemished


 
Alternative Views:


MSRP: $50.00



Availability: This item is no longer available
Product Code:
EGW-49500-BLEM

Cosmetic Blem (Must Select)

I acknowledge this product may have cosmetic blems and is sold AS-IS with no returns available

Qty:  
*Sign Up To Be Emailed When This Item Is Back In Stock*
Description Learn More
 
**Blemished** This item may contain cosmetic blems, but otherwise is in functional condition. The item is sold AS-IS with No Returns accepted.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

This mount fits:
  • Sig M17 (with Romeo1 PRO cut)
  • Sig M18 (with Romeo1 PRO cut)
  • Sig P320 X-Five Legion (with Romeo1 PRO cut)
  • Sig P320 X-Carry Optics Ready (with Romeo1 PRO cut)
  • Sig P320 X-Compact (with Romeo1 PRO cut)

Installation Instructions

  • Remove the rear sight*
  • Install the EGW Sight Mount in the dovetail
  • Tighten set screw (if applicable)
  • Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  • Apply blue Loctite to the provided mounting screws
  • Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR


Specifications:
  • Material: 7075 Aluminum
  • Coating: Matte Black Hardcoat
  • Overall Length: 2.398"
  • Overall Width: .99"
  • Mounting Hardware: (2) 6-32 Flat Head Screws, (2) 4-40 X 1/4 Set Screws
  • Red Dot Fitment: Trijicon RMR / SRO, Holosun HS507C