Home > AR Parts > AR-15 Parts > AR-15 Upper Parts > AR-15 Bolt parts/BCGs >

JP AR-15 Enhanced Bolt Assembly
JP AR-15 Enhanced Bolt Assembly


 
Alternative Views:


MSRP: $131.95
Sale Price: $125.35
JoeBob dun saved you $6.60!



Availability: Usually Ships in 24 Hours
Product Code:
JP-EB-223
Qty:

Description Learn More
 
Whether we want to admit it or not, the good old Mil-spec bolt has had a good run, but it's long past its retirement age, and the JP EnhancedBolt™ is there to pick up where it left off.

Material matters, and the Carpenter 158 steel of the standard Mil-spec bolt is suboptimal for such a high-load application leading to a life expectancy of only about 6,000 rounds. In fact, standard bolts will start to show stress cracks on the locking lugs adjacent to the extractor cut after only 3,000 rounds while cracking at the cam pin hole and weak extractor spring tension only add to the problems of the Mil-spec bolt. Fine enough for its time, the material used in these standard bolts is simply not the best choice by today's standards.

The SAE 9310 of the JP EnhancedBolt™ is a superior steel alloy in virtually every way compared to the C-158, whether in its resistance to structural failure or life expectancy, both of which far exceeding the Mil-spec. Just as with the transmission gears for Formula 1 racers which are also made from 9310, the operational demands of a bolt assembly are ideally suited to this state-of-the-art material, with actual full-auto endurance torture tests prove it.

Beyond its material advantages, the design of the JP EnhancedBolt™ boasts many other advantages, including the addition of material around the cam pin hole to eliminate this inherent weak point of the bolt design itself. Each bolt also comes assembled with our proprietary Enhanced Ejector, Enhanced Extractor (.308 and Grendel) and Enhanced Gas Rings for improvements in every subcomponent. Yet even with these advanced components, all EnhancedBolts™ (excepting our .308 high pressure model, for obvious reasons) are fully compatible with the readily available Mil-spec subcomponents, including a standard configuration extractor—all the benefits of a state-of-the-art proprietary platform with none of the inconvenience.

Our proprietary bolt design, the JP EnhancedBolt™ is compatible with any AR-15 platform using a Mil-spec bolt carrier and sub-components.

Weight: 1.5 oz.

Features:
  • SAE 9310 steel construction for superior resiliency and extended lifespan
  • DLC coating provides extreme surface hardness and lubricity while maintaining a ductile core
  • Near frictionless surface finish
  • Fully compatible with Mil-spec sub-components
  • Increased diameter cam pin hole eliminates most common bolt breakages
  • Improved lug geometry for reduced wear and easier locking/unlocking
  • Enhanced Ejector mitigates head case extrusions and reduces brass smear
  • Enhanced Extractor optimizes extraction function and eliminates common ejection failures
  • Enhanced Gas Ring reduced internal friction and carrier wear while maintaining near indefinite gas seal


Browse for more products in the same category as this item:

AR Parts > AR-15 Parts > AR-15 Upper Parts > AR-15 Bolt parts/BCGs
AR Parts > AR-15 Parts
AR Parts > AR-15 Parts > AR-15 Upper Parts
By Manufacturer > JP Enterprises
By Manufacturer > JP Enterprises > Gas System Parts