|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike Industries Ultra Light Pivot / Takedown Pins are designed to for those looking to build the lightest AR-15 possible. They are CNC machined from 7075 aluminum making them durable and much lighter than the pins found in a standard lower receiver parts kit.
Features:
- Extended Pivot Pin Length: 1.31"
- Extended Takedown Pin Length: 1.08"
- Weight: 0.20 oz net, 0.46oz gross
- Ultra Light, 7075 aluminum construction.
- Extended grasping surface
- Colorline anodized finish
Product Codes:
SI-AR-UL-EPTP-BK
SI-AR-UL-EPTP-BLU
SI-AR-UL-EPTP-RED
SI-AR-UL-EPTP-FDE
|
The Strike Billet Magazine Catch Assembly features a billet magazine release button. Sculpted from a solid piece of 6061 aluminum, the button offers a functional and aesthetic upgrade to your AR. Deep serrations and ergonomic shape facilitates positive engagement and identification even in the dark or adverse conditions. The blind thread and color anodized options provide for a unique, custom look to your AR.
Note: May not be compatible with all California compliant bullet buttons.
Product Specs
Materials:
- Magazine Release Button: 6061-T6 aluminum button
- Enhanced Magazine Catch: Steel
- Gross wt: 0.6 oz
- Net wt: 0.4 oz
Package includes:
- 1x Billet Magazine Release
- 1x Enhanced Magazine Catch
- 1x Magazine Catch Spring
Features:
- Textured for positive feel and manipulation
- Solid billet aluminum construction
- Functional and aesthetic upgrade
Product Codes:
SI-AR-SMC-BK
SI-AR-SMC-FDE
SI-AR-SMC-BLU
|
The Strike Industries Angled Vertical Grip with Cable Management is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails. No messy wires.
Package Contents:
- x1 Angled Vertical Grip
- x2 #8-32x0.3" screw
- x2 M-LOK nut
- x1 Torx key
- x1 Loctite® Threadlocker Blue 242®
Product Features:
- 86° grip angle
- Built-in cable management w/ excess wire storage (patent pending)
- Forward angle provides more of a natural wrist angle and increased rigidity of forearm
- Side cuts at top of grip for pressure switch cable routing
- Low-profile design to minimize snags
- Can be mounted in either direction for preferred setup
- Textured palm and finger areas with flat sides for better weapon manipulation control
- Made from durable and lightweight polymer
- For M-LOK rails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SI Modular Guide Rod for Gen 3 Glocks is a stainless steel, customizable system that accepts any aftermarket Glock Spring as well as Strike Industries custom recoil spring weights. Its stainless steel shaft and anodized aluminum end cap will not rust, crack or break as easily as polymer rods found in OEM Glock pistols, increasing its service life compared to standard recoil assemblies. Fine tune your Glocks recoil characteristics and improve reliability by using our Glock recoil springs offered in various weights without having to buy more than one guide rod. Simply unscrew the endcap, replace the spring to your preference, replace the end cap and you're good to go!
Product Specifications:
- Shaft ID: 0.223
- OD: 0.41
- Length: 3.10 (without shims)
Contents:
- 1x GMGR : SUS303
- 3x endcaps: 7075 T6 Aluminum
- 2x 0.2mm shims: SUS304
- 1x 0.4mm shims: SUS304
Instructions: The varieties of included shims are to ensure the guide rod fits a wide variety of Glock slides. Begin with just the 0.4mm shim and test for fit and function. the shims also change how flush the end cap is to the front of the slide.
Compatibility:
Fits G17,17L,22,24,31,34,35,37
Features:
- Easily swap different spring weights.
- Made from 303 Stainless Steel for corrosion resistance and increased toughness.
- Adjustable fit with the included shims even allows compatibility with the Strike Jitterplug Glock Gen 3 upgrade.
- Endcaps available in 4 different colors, and 3 different designs.
NOTE: These are Gen 3 size Glock Guide Rods.
NOTE: Very light reduced power springs may not function 100% in stock platforms when feeding from reduced capacity magazines.
NOTE: Use of medium strength thread locker to the endcap threads during installation is highly recommended.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc.
and GLOCK Ges.m.b.H. Neither Joe Bob Outfitters, LLC, nor this site
are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc.
or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to
advertise the sale of GLOCK pistols, parts, or components. For
additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and
parts visit www.glock.com.
|
Introducing the next iteration of our Ultimate Dust Cover Line... Billet UDC. Featuring our quick detach mechanism that allows you to install or remove the dust cover in under 10 Seconds. It also includes an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power. Our patent pending noise-reduction padding also makes it nearly 100% silent during activation. Now available in heavy duty machined billet aluminum construction and in 4 anodized color lines (black, red, blue and FDE). Sleek, stylish, each to use, and durable. The Strike Industries Billet Ultimate Dust Cover the essential upgrade to your existing dust cover.
Package includes:
- 1x Billet ultimate dust cover
- 1x Pack of 4 rubber pads
Features:
- Available in Red, Blue, FDE, and Black
- Quick and easy installation/removal
- Built in double seal for improved debris prevention
- Solid Billet Aluminum construction for durability
Not Compatible:
-Aero Precision M4E1 upper receivers
-Lantac E-BCG due to carrier and bolt design
-MUR: Modular Upper Receiver
-ZRO Delta upper receiver
|
The patented Strike Industries AR Multi-Angle Pistol Grip (MAPG) gives you a custom adjustment for your specific shooting comfort, needs or mission. The MAPG has an adjustment range from 10 to 35 degrees offering a low angle for that PDW setup or modern shooting positions. Maximize the ergonomics of your AR if you shoot elbows in. For those whose style is to shoot elbows out, we have the high angles to match or go beyond the traditional A2 grip angle. For everyone in between, Strike Industries has got you covered with this adjustable grip. To adjust the angle of the grip, its quick and easy without even removing this pistol grip from the lower receiver. Simply remove the rubber grip plug and use the included hex tool to turn to your desired angle. The MAPG includes the Strike Pistol Grip Plug Tool Holder Insert so you can store the hex tool as well as other tools that fit or a CR2032 battery (not waterproof) in an organized storage compartment. Get a handle of your weapon with the positive aggressive texture. All hardware is included to swap out an existing grip or a great base for a brand new build. Get maximum ergonomics and a custom angle and improved handling from the Strike Industries AR Multi-Angle Pistol Grip.
Package Contents:
- x1 Multi-Angle Pistol Grip (fully assembled)
- x1 Pistol grip plug with Strike Pistol Grip Plug Tool Holder Insert
- x1 Pistol grip screw
- x1 Crush washer
- x1 Hex tool [2.5mm]
Product Features:
- Custom adjust the perfect angle for your specific shooting comfort or needs
- Pistol grip ranges from 10 to 35 degrees
- Low angles for PDW setups and modern shooting positions (elbows in)
- Quick & easy adjustments without removing grip from lower receiver using included hex tool
- Secure storage underneath with an included rubber grip plug
- Includes Strike Pistol Grip Plug Tool Holder Insert where adjustment hex tool can live along with room for other tools or CR2032 battery (not waterproof)
- Positive aggressive texture
- All hardware needed for installation is included
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike Latchless Charging Handle represents yet another step forward for the AR 15. Simple in its execution, yet robust and reliable, the revolutionary Strike Latchless Charging Handle offers forged 7075 construction, efficient side gas venting, and a solid, comfortable interface for the user. Reliable receiver lockup is achieved through a novel hidden spring mechanism that uses the Charging Handle insertion slot in the upper receiver charging handle channel. This channel features a natural radius that will not wear rapidly like the external, 90-degree edge of the standard CH latch area of the upper receiver. The flat spring bearing surface is much larger than a steel ball bearing, spreading force and wear out over a larger area. Increased service life is one benefit of this type of system, as is the comfort and peace of mind that come from a lack of moving or external components that can break or snag/catch on your gear and foreign objects.
The solid aluminum construction is durable and provides a solid mounting
point for the ISO Tabs, an add-on component that increases surface area
for those using large optics and/or gloved hands.
NOTE: For standard mil-spec AR15 only. Not rated for suppressors and /or full auto fire. Not for use on SBRs or pistol length barrels (<14.5")
Package includes:
- 1x Ambi Charging Handle (Previously known as the "Phantom" charging handle
Features:
- Improved service life over competing designs.
- Ambidextrous architecture.
- Simple, sleek, snag free design.
- High-efficiency Gas Vents.
- 7075 Forged Aluminum Construction.
Product Codes:
SI-AR-SLCH-BK
SI-AR-SLCH-FDE
SI-AR-SLCH-BLU
SI-AR-SLCH-RED
SI-AR-SLCH-GRY
|
Introducing the Strike Industries Ambidextrous Magazine Release. The most ergonomic revision of our mag release built to date. The patented Ambi Mag Release allows for seamless ejections from any position.
This improved design drops into any receiver designed to accept a mil-spec magazine catch. Low profile, and ergonomically designed, the mag-catch integrates with most receivers while being very easy to use and will not accidentally activate or interfere with other controls. The package also includes our enhanced Strike Magazine Release button and spring for a complete drop-in upgrade.
For left-handed folks or for those that just want more options, the Strike Ambi-Mag Release is the perfect component to have.
Disclaimer: Designed for receivers that accept mil-spec magazine catches only.
NOT COMPATIBLE WITH ASC OR STAG ARMS GI MAG
Features:
- Allows ambidextrous activation of the magazine release
- Drop-In replacement for ambidextrous use
- Comes with Strike Magazine Release Button and spring
- Compatible with standard AR15/M16 receiver specs.
Package includes:
- 1x ambi magazine catch
- 1x magazine catch spring
- 1x Strike magazine catch.
|
The new ARCH-EL Charging Handle from Strike Industries is a T-6 7075 forged hard anodized charging handle featuring a larger aluminum latch surface that functions with ease in adverse conditions. The SI ARCH-EL featuring the SI Extended Latch, only one on the market made of aluminum, will not wear your receiver as fast compared to any other steel latch! With its high polished surface, its ergonomic design makes for a smooth, clean charge. The quality of the ARCH-EL is second to none and it's built for durability. Once you place the ARCH-EL on your rifle, you will see, feel, and know the quality of the ARCH-EL!
Package include
- 1 x Charging Handle with Extended Latch
Features
- Enlarged Extended Grasping Surface for Smooth Operation under Extreme Conditions
- Traditional Concealed Latch Co-existed with the SI ARCH for Normal Operation
- Aluminum Construction for minimized weight and wont wear your receiver!!!
- Fits All Standard AR15 Charging Handles with No Gunsmithing Required
Note: Not guaranteed to be compatible with Anderson MFG Upper Receivers.
Product Codes:
SI-ARCH-EL-BK
SI-ARCH-EL-RED
SI-ARCH-EL-BLU
SI-ARCH-EL-FDE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Strike AR Picatinny Stock Adapter gives the user the ability to mount a 1913 Picatinny interface stock/stabilizer assembly where normally the receiver extension is attached. For ARs that do not need an in-line buffer and buffer spring to function, this is a simple, fast and budget friendly conversion that works on both AR-15 and AR-10 lower receivers. The Strike AR Picatinny Stock Adapter mechanism threads into a standard AR rear 1 3/16"-16 HSS right hand thread and has an anti-loosening detent that is very positive and tactile while keeping the rear detent spring captured for the rear takedown pin. The 1913 Picatinny section of this adapter includes a 4-slot rail section. As an added feature, there is a 360° free swivel QD socket that the user can orientate to either left or right side to best configure the preferred setup. Compatible with majority of folding stocks or stabilizers on the market. When you want to use an upper receiver where everything is self-contained, quickly convert your AR lower receiver to mount a Picatinny stock or stabilizer with the Strike AR Picatinny Stock Adapter.
Package Contents:
- x1 Strike AR Picatinny Stock Adapter (fully assembled)
- x1 Torx tool [T25]
Product Features:
- Mount a 1913 Picatinny interface stock/stabilizer
- 4-Slot Picatinny rail section
- Retains rear detent spring captured for the rear takedown pin
- Quick and easy to install
- Includes everything needed to convert your AR lower receiver
- Orientate steel QD socket to desired side
COMPATIBILITY:
- Mil-Spec AR-15 and AR-10 ArmaLite/DPMS pattern lower receivers
- For use with upper where everything is contained in the upper
DISCLAIMER:
- Anodized areas (including anodized area around Torx T25 screw hole) that touch between end plate and castle nut will have expected minor scratches from torqueing of castle nut
- Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary
|
Introducing the TRIBUS Enhanced Anti-Rotation Castle Nut & Extended End Plate. The TRIBUS is next iteration of our previous AR-ECN&EEP. New features include two addition QD mounting points added to the left & right side of the extended end plate. Totaling in 3 QD mounting points. The extended end plate's QD mounts are pushed back away from the webbing of the primary hand, allowing for better weapon manipulations in tight spaced and under stress without the startling pain that can result from a pinched hand when using a sling attached to a standard, flat QD end plate. Another big improvement is the added anti-rotation castle nut feature. Once installed, use the set screw to prevent the castle nut from backing out during weapon usage. The TRIBUS is available in our anodized color line.
Features:
- Antiroation Castle Nut
- 3 QD Mounting Points
- Extended End Plate for prevention of pinching hand when using a sling attached
- Staking not required, castle nut will not back out once screw is threaded.
Package includes:
- 1x Extended castle nut
- 1x Extended end plate
- 1x (insert allen key size) screw
- 1x 1.5mm hex key
|
|
|
