Armaspec AR-10 Stealth Recoil Spring - 308/AR-10

Home >

Armaspec AR-10 Stealth Recoil Spring - 308/AR-10 - Gen 3

Alternative Views:

MSRP: $84.99

Availability: This item is no longer available

Product Code: ARMA-153-AR10

Qty:

Description

Learn More

The Stealth Recoil Spring™ SRS™ GEN3 is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.

NOTE: The new GEN3 version does not have the oring on the weight.

To eliminate any potential failure points we changed the screw to a roll pin across the plastic end piece and the cap is machined on the rod.

FEATURES:

Drop-in replacement for standard buffer and spring
Reduce felt recoil
Keep the buffer spring from rubbing against the inner wall of the buffer tube
Buffer mass is designed to stay under constant tension against the bolt carrier
Made in the U.S.A.
Lifetime Warranty

SPECIFICATIONS:

Length: 7.18"
Actual Wight (Complete System): 7.09 oz.
Equivalent Weight: 5.7 oz.

COMPATIBILITY:

AR-10 in .308 and 6.5 Creedmore with carbine-length buffer tube

INSTALLATION AND MAINTENANCE:

Before installing the recoil spring, it is always a good idea to retighten the screws using either using two 3/32 hex key and fully tightening both screws at the same time or using one 3/32 hex key and using the hole in the rod for leverage.
The screws should be re-tightened every time maintenance is performed on the firearm.
The polymer bumper goes towards the rear of the firearm and the weight mass with the o-ring goes towards the bolt carrier.
The SRS can be installed with our without the buffer retainer. Most people run the SRS without the buffer retainer for ease of maintenance.