These lowers may have cosmetic blems and are sold AS IS! Lowers are guaranteed to be in-spec and serviceable. Please do not purchase this lower receiver if you are unable to accept a lower receiver that is not 100% perfect. Blem lowers receiver may have small blemishes, dings, nicks, or logo omissions. Unfortunately blems cannot be hand-picked.
The Spartan-15 Enhanced Stripped Billet Lower Receivers are the perfect start to any custom AR15 rifle or pistol!
-Manufactured from a solid block of Aircraft Grade 7075-T6 Billet Aluminum
-Broached Magazine Well with drop free design and beveled bottom lip
-CNC Deep Rotary Engraved to exceed ATF depth requirements
-MIL-A-8625 Type III Hard Anodizing (Deep Black)
-Captured take down pin spring/detent (includes hardware)-Uses 1/16" Allen wrench
(Rear take-down pin spring may need to be trimmed if set screw is used to give proper tension on pin)
-Upper Tensioning screw (includes hardware)-Uses 1/8" Allen wrench
-Threaded bolt catch pin hole (includes hardware)-Uses 1/16" Allen wrench
-Safety Selector pocket notched for BAD 45 degree selector drop in with no modifications needed
-Engraving accommodates 45 degree BAD, 60 degree Noveske, and 90 degree (standard) selectors
-Compatible with Norgon and other aftermarket ambi mag releases
-Integrated enhanced trigger guard
-Low Shelf design to make full auto conversions for LE, MIL or post sample machine guns easier (RDIAS/RLL)
-Continuous threading through receiver extension hole and pistol grip screw hole
-Compatible with all Lower Parts Kits, Mil-Spec and Commercial receiver extensions, and most aftermarket parts.
-The Tactical Link AR-15 Enhanced Battery Assist Lever WILL work with the ML-15
-Like most billet lowers, the Magpul BAD lever will NOT function properly on the ML-15
Serial #: KS-*****
Logo: "Molon Labe" w/ Spartan Helmet
Manufacturer Markings: Joe Bob Outfitters Hays, KS USA*
*Receivers are contract machined by a US Firearms Manufacturer for JBO