You are here: Home > Matrix Forearm Length > 13"
Sort By:
Page of 1
Matrix Arms  AR-15 Charlie KeyMod Handguard Matrix Arms AR-15 Foxtrot KeyMod Handguard Matrix Arms AR-15 Victor KeyMod Handguard
Matrix Arms AR-15 Charlie KeyMod Handguard
MSRP: $89.95
Sale Price: $49.95
JoeBob dun saved you $40.00!
Matrix Arms AR-15 Foxtrot KeyMod Handguard
MSRP: $89.95
Sale Price: $49.95
JoeBob dun saved you $40.00!
Matrix Arms AR-15 Victor KeyMod Handguard
MSRP: $89.95
Sale Price: $49.95
JoeBob dun saved you $40.00!
The 5.56 Charlie KeyMod Handguard is a lightweight free floating handguard featuring a continuous Mil-Spec 1913 Picatinny rail. Constructed out of 6061 T6 Aluminum and hard coat anodized for superior finish and strength. The sleek extrusion with KeyMod attachments creates a light weight design that can support lights, sights, lasers, and all other accessories only where desired. Three hardened Allen screws for rock-solid alignment and hold with upper receiver. The Charlie is machined for aesthetics and functionality. The "C" design creates a platform that reveals the flash suppressor, but still giving functionality of both the extended grip and full Picatinny rail.

These handguards are a slim profile with an approximate interior width of 1.3".

Includes: 5.56 Barrel Nut and Hardware (Barrel nut will be INSTALLED inside of handguard)*
*If barrel nut is difficult to remove from handguard thread your upper receiver into the barrel nut and pull lightly to remove barrel nut.

7" Charlie (7.196")
Weight: 5.6oz
MSRP: $89.99

9" Charlie (9.56")
Weight: 7.2oz
MSRP: $99.99

11" Charlie (11.136")
Weight: 8.8oz
MSRP: $114.99

13" Charlie (13.5")
Weight: 10.4oz
MSRP: $129.99

15" Charlie (15.076")

Weight: 12oz
MSRP: $149.99

Installation of the barrel nut requires a 1 3/16" crowsfoot wrench. A 9/64 Allen key is required to tighten the 3 screws.

PROUDLY MADE IN THE USA!


The 5.56 Foxtrot KeyMod Handguard is a lightweight free floating handguard featuring a continuous Mil-Spec 1913 Picatinny rail. Constructed out of 6061 T6 Aluminum and hard coat anodized for superior finish and strength. The sleek extrusion with KeyMod attachments creates a light weight design that can support lights, sights, lasers, and all other accessories only where desired. Three hardened Allen screws for rock-solid alignment and hold with upper receiver.. The flat end of the Foxtrot allows for maximum customization, while maintaining a sharp geometric profile.

These handguards are a slim profile with an approximate interior width of 1.3".

Includes: 5.56 Barrel Nut and Hardware (Barrel nut will be INSTALLED inside of handguard)*
*If barrel nut is difficult to remove from handguard thread your upper receiver into the barrel nut and pull lightly to remove barrel nut.

7" Foxtrot (7.196")
Weight: 5.6oz
MSRP: $89.99

9" Foxtrot (9.56")
Weight: 7.2oz
MSRP: $99.99

11" Foxtrot (11.136")
Weight: 8.8oz
MSRP: $114.99

13" Foxtrot (13.5")
Weight: 10.4oz
MSRP: $129.99

15" Foxtrot (15.076")

Weight: 12oz
MSRP: $149.99

Installation of the barrel nut requires a 1 3/16" crowsfoot wrench. A 9/64 Allen key is required to tighten the 3 screws.

PROUDLY MADE IN THE USA!


The 5.56 Victor KeyMod Handguard is a lightweight free floating handguard featuring a continuous Mil-Spec 1913 Picatinny rail. Constructed out of 6061 T6 Aluminum and hard coat anodized for superior finish and strength. The sleek extrusion with KeyMod attachments creates a light weight design that can support lights, sights, lasers, and all other accessories only where desired. Three hardened Allen screws for rock-solid alignment and hold with upper receiver. The forward slant design allows the shooter to further extend hand grip for accuracy and releasing heat upwards.

These handguards are a slim profile with an approximate interior width of 1.3".

Includes: 5.56 Barrel Nut and Hardware (Barrel nut will be INSTALLED inside of handguard)*
*If barrel nut is difficult to remove from handguard thread your upper receiver into the barrel nut and pull lightly to remove barrel nut.

7" Victor (7.196")
Weight: 5.6oz
MSRP: $89.99

9" Victor (9.56")
Weight: 7.2oz
MSRP: $99.99

11" Victor (11.136")
Weight: 8.8oz
MSRP: $114.99

13" Victor (13.5")
Weight: 10.4oz
MSRP: $129.99

15"
Victor (15.076")
Weight: 12oz
MSRP: $149.99

Installation of the barrel nut requires a 1 3/16" crowsfoot wrench. A 9/64 Allen key is required to tighten the 3 screws.

PROUDLY MADE IN THE USA!
Matrix Arms AR-15 Foxtrot M-LOK Handguard
Matrix Arms AR-15 Foxtrot M-LOK Handguard
MSRP: $89.95
Sale Price: $49.95
JoeBob dun saved you $40.00!


The 5.56 Foxtrot M-LOK Handguard is a lightweight free floating handguard featuring a continuous Mil-Spec 1913 Picatinny rail. Constructed out of 6061 T6 Aluminum and hard coat anodized for superior finish and strength. The sleek extrusion with M-LOK attachments creates a light weight design that can support lights, sights, lasers, and all other accessories only where desired. Three hardened Allen screws for rock-solid alignment and hold with upper receiver.. The flat end of the Foxtrot allows for maximum customization, while maintaining a sharp geometric profile.

These handguards are a slim profile with an approximate interior width of 1.3".

Includes: 5.56 Barrel Nut and Hardware (Barrel nut will be INSTALLED inside of handguard)*
*If barrel nut is difficult to remove from handguard thread your upper receiver into the barrel nut and pull lightly to remove barrel nut.

7" Foxtrot (7.196")
Weight: 5.6oz
MSRP: $89.99

9" Foxtrot (9.56")
Weight: 7.2oz
MSRP: $99.99

11" Foxtrot (11.136")
Weight: 8.8oz
MSRP: $114.99

13" Foxtrot (13.5")
Weight: 10.4oz
MSRP: $129.99

15" Foxtrot (15.076")

Weight: 12oz
MSRP: $149.99

Installation of the barrel nut requires a 1 3/16" crowsfoot wrench. A 9/64 Allen key is required to tighten the 3 screws.

PROUDLY MADE IN THE USA!