You are here: Home > Elftmann Trigger Bow > Straight
Sort By:
Page of 1
Elftmann Tactical AR-15 SE Trigger Elftmann Tactical AR-15 Match Trigger Elftmann Tactical AR-10 / .308 Trigger
Elftmann Tactical AR-15 SE Trigger
MSRP: $169.00
Sale Price: $162.00
JoeBob dun saved you $7.00!
Elftmann Tactical AR-15 Match Trigger
MSRP: $259.00
Sale Price: $249.00
JoeBob dun saved you $10.00!
Elftmann Tactical AR-10 / .308 Trigger
MSRP: $259.00
Sale Price: $249.00
JoeBob dun saved you $10.00!
The ELF-SE Drop-In Trigger maintains the Elftmann reputation for quality, craftsmanship and customer service in an affordable package. The mid-weight hammer combined with our exclusive .043 double double wound polished piano wire hammer spring provide reliable ignition and fast lock time. Made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-
grade aluminum.

Extremely short takeup, clean crisp break and very short, positive reset. Non - adjustable 3.5lb pull weight, non-skeletonized trigger shoe and no bearings...but we’ll put it up against any trigger made - except our performance series utilizing sealed bearings. Ultra-Light housing is standard - Total physical weight of entire unit is just
2.3oz

Available with a curved or straight shoe.

Features:
Fits any mil-spec AR-15 (Large pin Colt available)
Absolutely Drop-Safe
Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy
3.5lb pull weight - non-adjustable
Exclusive double double wound hammer spring
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
aircraft-grade aluminum and hardened steel
Unique design of disconnector allows full 1/4” width eliminating possibility of wear and double-firing
100% made in America with a Lifetime Guarantee!
Ultra-Light housing is standard - Total physical weight of entire unit is just 2.3oz
ELF Match Trigger

The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe.

The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you.

Features
  • Fits any mil-spec AR-15
  • Absolutely Drop-Safe regardless of pull-weight
  • Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger,
  • providing a great combination of speed and accuracy
  • Adjustable from 4lbs to 2 3/4lbs without removing from lower
  • Full power hammer spring ensures proper ignition of primer
  • Very short pull and reset allows for rapid follow up shots and greater accuracy
  • Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
  • aircraft-grade aluminum and hardened steel
  • Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
  • High performance trigger and hammer needle bearings for smoother and faster firing
  • 100% made in America with a Lifetime Guarantee!
The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of high powered calibers. The only AR-10 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Our exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. The AR-10 trigger is essentially the service trigger with a lighter pull weight range.

A second-to-none AR-10 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The AR-10 trigger may be ordered with a curved or straight shoe.

The amazingly short take-up, glass-rod crisp break and next to zero overtravel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your AR-10 platform, this is the trigger system for you

Features:

Fits any mil-spec AR-10
Absolutely Drop-Safe regardless of pull-weight
Adjustable from 2 3/4lbs to 4lbs without removing from lower
Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel
Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
High performance trigger and hammer needle bearings for smoother and faster firing
100% made in America with a Lifetime Guarantee!
Elftmann Tactical AR-9 Trigger Elftmann Tactical AR-15 3-Gun Trigger
Elftmann Tactical AR-9 Trigger
MSRP: $259.00
Sale Price: $249.00
JoeBob dun saved you $10.00!
Elftmann Tactical AR-15 3-Gun Trigger
MSRP: $279.00
Sale Price: $269.00
JoeBob dun saved you $10.00!
ELF AR-9 Match Trigger

The ELF AR-9 Drop-In Match Trigger has been built for performance. Specifically developed for 9mm and .45 PCC platforms, after tens of thousands of rounds of testing in all platforms, the boss has decided this is the best trigger we have ever produced and does it all in every AR platform. It has a u-shaped captured disconnector that forces a positive hold on the hammer and also has a "pad" that matches up to an extension on the hammer. The pad is directly in line with the rear trigger pin so when the hammer is stopped by those matching surfaces it effectively eliminates trigger slap from the hammer hitting the disconnector and greatly enhances the feel of the trigger during live fire. All our performance series triggers utilize aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe.

The amazingly short take-up, glass-rod crisp break and next to zero over travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-9 / AR-45 platform, this is the trigger system for you.


Features
  • Fits any mil-spec AR Platform
  • Absolutely Drop-Safe regardless of pull-weight
  • Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy
  • Adjustable from 4lbs to 2 3/4lbs without removing from lower
  • Full power hammer spring ensures proper ignition of primer
  • Very short pull and reset allows for rapid follow up shots and greater accuracy
  • Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel
  • Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
  • High performance trigger and hammer sealed bearings for smoother and faster firing
  • Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire.
  • 100% made in America with a Lifetime Guarantee!
ELF 3-Gun Trigger

The ELF 3-Gun Drop-In Trigger has been built for winning competitions. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe.

The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you.

Features
  • Fits any mil-spec AR-15
  • Absolutely Drop-Safe regardless of pull-weight
  • Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger,
  • providing a great combination of speed and accuracy
  • Adjustable from 4lbs to 2 3/4lbs without removing from lower
  • Full power hammer spring ensures proper ignition of primer
  • Exclusive double wound hammer spring and skeletonized hammer ensure a lock time second to none
  • Very short pull and reset allows for rapid follow up shots and greater accuracy
  • Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
  • aircraft-grade aluminum and hardened steel
  • Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
  • High performance trigger and hammer needle bearings for smoother and faster firing
  • 100% made in America with a Lifetime Guarantee!
  • Ultra-Light housing is now standard - Total physical weight of entire unit is just 2oz