You are here: Home > Magpul Colors > Dark Earth
Sort By:
Page of 1
Magpul AR-15 MOE Enhanced Polymer Trigger Guard MAGPUL Picatinny Ladder Rail Panel MAGPUL Picatinny RVG (Rail Vertical Grip)
Magpul AR-15 MOE Enhanced Polymer Trigger Guard
MSRP: $8.95
Sale Price: $7.95
JoeBob dun saved you $1.00!
MAGPUL Picatinny Ladder Rail Panel
MSRP: $11.95
Sale Price: $11.50
JoeBob dun saved you $0.45!
MAGPUL Picatinny RVG (Rail Vertical Grip)
MSRP: $24.95
Sale Price: $19.95
JoeBob dun saved you $5.00!
The MOE Trigger Guard is an enhanced polymer drop in replacement for the AR15/M16 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardward included. Made in U.S.A.
Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail.
MAGPUL MOE RVG (Rail Vertical Grip) - Black Designed for use with MOE and ACR (Adaptive Combat Rifle) Hand Guards, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip.
MAGPUL  MOE AK + Grip MAGPUL AR-15 MOE Fixed Carbine Stock MIL SPEC MAGPUL Picatinny AFG2 Angled Fore Grip 2
MAGPUL MOE AK + Grip
MSRP: $24.95
Sale Price: $21.95
JoeBob dun saved you $3.00!
MAGPUL AR-15 MOE Fixed Carbine Stock MIL SPEC
MSRP: $29.95
Sale Price: $27.95
JoeBob dun saved you $2.00!
MAGPUL Picatinny AFG2 Angled Fore Grip 2
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ Grip is designed to improve ergonomics and weapon control, and borrows the rubber overmolded surface of the popular MOE+ AR15/M4 grip to ensure a positive and comfortable hold on the weapon. Compatible with Magpul Grip Cores for storage customization.
 
All mounting hardware included.
 
Made in U.S.A.
Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality. The MOE Fixed Carbine Stock Mil-Spec Model provides a fixed, non-collapsing stock option for carbine-length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with the ASAP Plate and PRS Extended Rubber Butt Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed
Unlike conventional vertical fore-grips, the Magpul AFG2 (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, the AFG2 helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots.

The AFG2 is a slim line design that is shorter in overall length and width compared to the AFG1. Smaller size allows for compatibility with a wider variety of rail systems, rail covers, and accessory mounts.

Features

    * Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub
    * Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended)
    * All mounting hardware included

Specifications

    * AFG2 - Angled Fore Grip
          o Weight: 2.53 oz.
          o Length: 4.70 in.
          o Height, over rail: 1.94 in.
          o Width, maximum: 1.37 in.

Made in U.S.A.
MAGPUL MS1 Multi Mission Sling MAGPUL AR-15 Midlength MOE M-LOK Handguard MAGPUL AR-15 MOE Mil-Spec Carbine Stock
MAGPUL MS1 Multi Mission Sling
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 Midlength MOE M-LOK Handguard
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE Mil-Spec Carbine Stock
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
The MS1 Sling is the newest and most versatile addition to the Magpul line of rifle slings. This sling system starts with an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3 and MS4 slings. By adding the appropriate adapter (available with Paraclip or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.

Like all of our slings, the entire MS1 system is made entirely in the US, and is fully Berry Amendment compliant.

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
MAGPUL AK47/AK74 MOE Handguard MAGPUL AK47/AK74 MOE Handguard MAGPUL AR-15 MOE SL  M-LOK Handguard - Mid Length
MAGPUL AK47/AK74 MOE Handguard
MSRP: $36.95
Sale Price: $34.95
JoeBob dun saved you $2.00!
MAGPUL AK47/AK74 MOE Handguard
MSRP: $36.95
Sale Price: $34.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE SL M-LOK Handguard - Mid Length
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
PRODUCT DETAILS

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.
Made in U.S.A.

FEATURES

  • Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
  • Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
  • Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
  • Reinforced, heat-resistant polymer construction
  • Integral, black oxide coated stainless steel heat shield
  • Front lip and long side extensions shields hand from hot barrel while providing increased gripping surface
  • Includes replacement polymer Top Cover
  • Compatible with UltiMAK Optics Mount top cover
  • Accepts factory cleaning rod
PRODUCT DETAILS

The Magpul MOE AKM Hand Guard is a replacement for original stamped receiver AK-47/AKM/AK-74 pattern rifles with a front sling loop on the hand guard retainer.
Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AKM Hand Guard is an upgrade to any AK pattern rifle.

Made in U.S.A.

FEATURES

  • Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
  • Easy to install utilizing existing front hand guard retaining cap with sling loop*
  • Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
  • Reinforced, heat-resistant polymer construction
  • Integral, black oxide coated stainless steel heat shield
  • Front lip and side extension shields hand from hot barrel while still allowing use of factory sling loop
  • Includes replacement polymer Top Cover
  • Compatible with UltiMAK Optics Mount top cover
  • Accepts factory cleaning rod
The MOE SL Hand Guard for AR15/M4 firearms with mid-length gas system and A2 font sight* provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design.
Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. A large front extension and lower lip protects the user from the hot front sight assembly and maximizes useable hand guard length.

Made in U.S.A.

FEATURES
Narrow design replaces factory 2-piece, mid-length plastic hand guards
Easy to install utilizing existing delta ring and ROUND front hand guard retaining cap with A2 front sight assembly*
Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and long side extensions shields hand from hot sight assembly
    MAGPUL AR-15 MOE M-LOK Handguard Rifle Length MAGPUL AR-15 MOE Rifle Stock MAGPUL AK47/AK74 ZHUKOV Handguard - AK47/AK74
    MAGPUL AR-15 MOE M-LOK Handguard Rifle Length
    MSRP: $39.95
    Sale Price: $37.95
    JoeBob dun saved you $2.00!
    MAGPUL AR-15 MOE Rifle Stock
    MSRP: $69.95
    Sale Price: $59.95
    JoeBob dun saved you $10.00!
    MAGPUL AK47/AK74 ZHUKOV Handguard - AK47/AK74
    MSRP: $99.95
    Sale Price: $96.95
    JoeBob dun saved you $3.00!

    The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M16 rifles with rifle-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

    Made in U.S.A.

    Features

    • Replaces standard plastic M16-type rifle-length hand guards
    • Compatible with both 'direct impingement' and most piston-driven gas systems
    • Easy to install utilizing existing delta ring and triangular or round front hand guard retaining cap
    • M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
    • Reinforced, heat-resistant polymer construction
    • Integral riveted aluminum heat shield
    • Front lip and side extensions, shields hand from hot gas block
    • Relieved area at the top rear accommodates most overhanging optic mounts

    Specifications

    • MOE M-LOK Hand Guard, Rifle-Length
      • Weight: 12.1 oz.
      • Length, overall: 12.6 in.
      • Length, mounting: 12.0 in.
      • Height, excluding lip: 2.5 in.
      • Width, max: 2.2 in.

    NOTE: The MOE M-LOK Hand Guard Rifle-Length is a direct replacement for factory-type M16 hand guards and utilizes the existing front hand guard retaining cap and delta ring.
    The Magpul MOE Rifle Stock is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube). Designed as a basic upgrade, the stock features integral 1.25" sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.

    Made in U.S.A.

    Product Details

    The Magpul Zhukov Hand Guard is a fully-featured AK forearm for the modern AK. The Zhukov Hand Guard casts aside traditional AK forearm shortcomings and offers an extended option for modern shooting techniques, an aluminum chassis for strength and heat dispersion, a comfortable injection molded exterior for superior ergonomics, and M-LOK slots for optimized accessory attachment. Compatible with the Ultimak gas tube rail for optics mounting, the Zhukov Hand Guard redefines functionality for the modern AK platform.

    Installation requires permanent removal of the hand guard retainer.

    Made in U.S.A.

    Features

    • Extended length provides large gripping surface for modern shooting techniques as well as additional accessory mounting positions
    • Mounts to most AK-47/AKM/AK-74 rifles with barrel diameters between 17-18 mm and greater than 13" in length*
    • Full length, hard anodized, aluminum chassis clamps directly to barrel and provides for flex-free mounting as well as excellent heat shielding
    • Durable polymer outer cover
    • Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
    • Includes replacement polymer Top Cover
    • Compatible with UltiMAK Optics Mount top cover

    Specifications**

    • Zhukov Hand Guard
      • Weight, w/ Top Cover: 15.1 oz.
      • Length, maximum: 11.7 in.
      • Width: 1.8 in.
      • Height, w/o Top Cover: 2.1 in.

    *NOTE: The Zhukov Hand Guard requires the permanent removal of the factory hand guard retaining cap and forward sling mount if so equipped. Due to the wide range of tolerances of your typical AK, minor additional fitting may be required.


    WARNING: Due to extended Hand Guard length, barrels less than 13" long are not recommended.

    **Specifications based on factory configuration. Weight of Top Cover 1.1 oz.
    MAGPUL AR15/AR10 PRS Stock-Gen3 MAGPUL Hunter American Stock for Ruger American SHORT ACTION Rifles MAGPUL Pro 700 Stock for Remington 700 SHORT ACTION Rifles
    MAGPUL AR15/AR10 PRS Stock-Gen3
    MSRP: $254.95
    Sale Price: $239.95
    JoeBob dun saved you $15.00!
    MAGPUL Hunter American Stock for Ruger American SHORT ACTION Rifles
    MSRP: $299.95
    Sale Price: $284.95
    JoeBob dun saved you $15.00!
    MAGPUL Pro 700 Stock for Remington 700 SHORT ACTION Rifles
    MSRP: $999.95
    Sale Price: $949.95
    JoeBob dun saved you $50.00!
    The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.

    With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it installs on rifle-length receiver extensions as well as mil-spec carbine and A5-length tubes. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK slots on the bottom for rear monopod mounting.

    Made in U.S.A.


    FEATURES

    • Mounts to rifle-length, mil-spec carbine, or A5-length receiver extension tubes (not included)
    • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
    • Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height
    • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
    • Steel adjustment shafts finished with Melonite for wear and corrosion resistance
    • All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
    • Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
    • Sling Mounts
    • Front/Rear - rotation-limited QD sling swivel mounts (swivels not included)
    • Rear - 1.25" aluminum sling loop (left-right reversible)


    Constructed of reinforced polymer and an anodized aluminum bedding block with steel recoil lugs, the Magpul Hunter American stock offers users a cost-effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with the Ruger American® Family of short action centerfire rifles, this stock requires no bedding and is your true “drop-in” solution. This stock is also M-LOK® compatible to accept a broad range of accessories to enhance your shooting experience. Included is our Bolt Action Magazine Well and a PMAG 5 7.62 AC, which allows the rifle to be used with detachable box magazines without any need for custom inletting.

    FEATURES
    • Compatible with Ruger American® short action rifles*
    • Bolt Action Magazine Well - Hunter American & PMAG 5 7.62 AC included for reliable detachable box magazine compatibility
    • Reinforced polymer construction with Type III Hard anodized, machine finished cast aluminum bedding block
    • High strength steel recoil lugs
    • Compatible with barrel profiles up to medium palma
    • Fully adjustable length of pull
    • Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
    • M-LOK compatible for additional accessories
    The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington® 700 actions and other Remington® 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

    Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.”

    Made in U.S.A.



    FEATURES
    • Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers
    • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8” hex wrench
    • Folding stock with push-button activated durable steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
    • Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
    • Optional inline mount for clip-on night vision and thermal imaging devices
    • Overall LOP adjustment range is 13.25” – 15.125”
    • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right 5 degrees
    • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
    • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage
    • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75” fore/aft trigger reach adjustment
    • Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep)
    • Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
    • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
    • Integrated AICS pattern magazine well optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
    • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
    • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
    • Ambidextrous thumb shelf for firing hand thumb placement
    • Two ¼-28x1/2” Socket Head Cap Screws are included for use as action screws

    SPECIFICATIONS

    • Weight - 5.4 lbs
    • Height at Butt Plate – 5.2”
    • Max width – 1.86”
    • Length – 32.7” – 34.6” (23.5” when folded)