You are here: Home > Strike Colors > Black
Sort By:
Page of 2
Strike Industries MLOK Rail Cover V1 - 5pcs Strike Industries MLOK Rail Cover V2 - 5pcs Strike Industries Enhanced Magazine Plate - +5 Rds - M3 PMAG
Strike Industries MLOK Rail Cover V1 - 5pcs
MSRP: $7.95
Sale Price: $6.95
JoeBob dun saved you $1.00!
Strike Industries MLOK Rail Cover V2 - 5pcs
MSRP: $7.95
Sale Price: $6.95
JoeBob dun saved you $1.00!
Strike Industries Enhanced Magazine Plate - +5 Rds - M3 PMAG
MSRP: $11.95
Sale Price: $10.95
JoeBob dun saved you $1.00!
The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!

Package Includes:
  • 5x M-Lok rail covers

Features:
  • Made to fit ALL M-Lok mounting surfaces.
  • Ultra-slim textured surface provides extra dexterity and positive weapon control.
  • Aggressive Non-Slip or Non-Reflective surface.
  • Available in Black and FDE.
  • Bi-directional.
  • Sacrificial cover absorbs all impact, protecting your rail system.
  • Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V1-BK
SI-MLOK-COVER-V1-FDE

The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!

Package Includes:
  • 5x M-Lok rail covers

Features:
  • Made to fit ALL M-Lok mounting surfaces.
  • Ultra-slim textured surface provides extra dexterity and positive weapon control.
  • Aggressive Non-Slip or Non-Reflective surface.
  • Available in Black and FDE.
  • Bi-directional.
  • Sacrificial cover absorbs all impact, protecting your rail system.
  • Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V2-BK
SI-MLOK-COVER-V2-FDE
The Strike Industries Extended Magazine Plate (E.M.P+5 for the PMAG M3) design provides smoother, faster magazine reloading, and handling. It provides multiple functions to include additional 5 round capacity.

Package Includes:
  • 1x Enhanced Magazine Plate +5

Features:
  • Finger groove for enhanced grip and easy pull from mag-well and pouch.
  • Plus 5 round capacity
Product Codes:
SI-EMP-5-BK
SI-EMP-5-FDE
Strike Industries ISO-Tab Charging Handle Extension Strike Industries AR-15 Extended Pivot / Takedown Pins Strike Industries AR-15 Strike Magazine Catch
Strike Industries ISO-Tab Charging Handle Extension
MSRP: $12.95
Sale Price: $11.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Extended Pivot / Takedown Pins
MSRP: $13.95
Sale Price: $12.50
JoeBob dun saved you $1.45!
Strike Industries AR-15 Strike Magazine Catch
MSRP: $14.95
Sale Price: $13.95
JoeBob dun saved you $1.00!
Enhance the speed and effectiveness of the Strike Latchless Charging Handle with the ISO-Tab from Strike Industries. Made out of lightweight but durable 6061-T6 aluminum, the ISO-Tab is built like a tank but without the weight. Improve your reaction time and never miss a beat even under stressful conditions with the combination setup of a latch-less charging handle and extension tab. Choose a one-sided or ambidextrous configuration according to your needs. Featuring an aggressive texturing and a wider surface area to latch onto, never miss a step to get back into the fight.


Features:

  • Enlarged, extended and textured grasping surface for easy and consistent CH manipulations under a variety of conditions.
  • Interchangeable on either side.
  • Available in Black, Blue, Red, and Flat Dark Earth
  • Enhances operation of Strike Latchless Charging Handles
  • Aluminum construction for durability and minimal added weight
  • Included screw for a secure fit.
  • (1) Isotab is included per package. The (1) Isotab can be installed on the right or left side of the Strike Latchless Charging Handles

Note: ONLY compatible with Strike Latch-Less Charging Handle

Note: It is highly recommended to apply threadlocker to the screw before installation.

Product Codes:
SI-ISOTAB-BK
SI-ISOTAB-BLU
SI-ISOTAB-FDE
SI-ISOTAB-RED
Strike Industries Extended Takedown Pins and Pivot Pins are ideal for shooters looking for a custom look and that run multiple upper receivers off of a single lower. Made out of Precision-Machined Steel. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.

Package Includes:
  • 1 x Extended Pivot pin
  • 1 x Extended Take down pin

Features:
  • Eliminates the need for a pin punch.
  • Locks into place securely.
  • Quick disassembly of the rifle.
Note: SI Extended Pivot Pins may not be a good fit for all billet receivers.

Product Codes:
SI-AR-EPTP-BK
SI-AR-EPTP-GC
SI-AR-EPTP-CC
The Strike Billet Magazine Catch Assembly features a billet magazine release button. Sculpted from a solid piece of 6061 aluminum, the button offers a functional and aesthetic upgrade to your AR. Deep serrations and ergonomic shape facilitates positive engagement and identification even in the dark or adverse conditions. The blind thread and color anodized options provide for a unique, custom look to your AR.

Note: May not be compatible with all California compliant bullet buttons.

Product Specs

Materials:
  • Magazine Release Button: 6061-T6 aluminum button
  • Enhanced Magazine Catch: Steel
  • Gross wt: 0.6 oz
  • Net wt: 0.4 oz

Package includes:
  • 1x Billet Magazine Release
  • 1x Enhanced Magazine Catch
  • 1x Magazine Catch Spring

Features:
  • Textured for positive feel and manipulation
  • Solid billet aluminum construction
  • Functional and aesthetic upgrade

Product Codes:
SI-AR-SMC-BK
SI-AR-SMC-FDE
SI-AR-SMC-BLU
Strike Industries Aluminum Base Plate for Glock Magazines Strike Industries LINK Anchor Polymer Hand Stop Strike Industries AR-15 Enhanced Ultimate Dust Cover - 223
Strike Industries Aluminum Base Plate for Glock Magazines
MSRP: $15.95
Sale Price: $13.95
JoeBob dun saved you $2.00!
Strike Industries LINK Anchor Polymer Hand Stop
MSRP: $14.95
Sale Price: $13.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Enhanced Ultimate Dust Cover - 223
MSRP: $15.95
Sale Price: $14.95
JoeBob dun saved you $1.00!
Enhance your GLOCK™ to be more ergonomic and aggressive in styling with our newly released Aluminum Base Plates.
The added geometrical curves allow a more refined grip on the end of the magazine for a smoother reload. Reload with speed and style because of the added ramp structure to assist in faster removal and easier insertion of your GLOCK™ magazine.

The anodized aluminum magazine base plates weigh 0.4 oz which is super lightweight and add an additional 15mm height

The Strike Aluminum Magazine Base Plates for GLOCK™ are CNC machined from durable 6061-T6 aluminum. As an added bonus, they are legal in all states because they do not add extra rounds to your magazine. A true aesthetic upgrade for any GLOCK™ owner or Competitive Shooter.

The improved angle of our base plate will allow you to stand your magazine upright on any flat surface, creating ease of storage as well as the ability to reload single-handedly on a table or stand.


Features
  • Enhanced Geometry Provides Better Grip
  • Baseplate Shape Adds weight for quicker mag release
  • Made from Ultra-durable 6061-T6 Aluminum
  • Custom Aesthetics for shooter

Specifications

  • Length:40.56mm
  • Width: 30.55mm
  • Height: 11.69mm Weight: .4 oz
  • Finish: Anodized aluminium (Black, Red, Blue, Titan)
  • Compatible with the following Glock models: 17, 17L, 19, 22, 23, 31, 32, 34, 35, 37, 38,
The LINK Anchor Handstop is made from a heat resistant polymer that allows comfortable grip in any shooting condition. It has a low profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the handstop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to the fingertips. A true lightweight modification that is not only comfortable , has an aggressive look, and will improve accuracy over time by a stabilizing your grip.

Product Features:
  • Aggressive ergonomic grip with ridges to enhance dexterity
  • Low profile, light weight, heat resistant design
  • LINK attachment system
  • Multi-directional attachment capabilities

Compatible with all MLOK / Keymod Handguards

Product Specifications:
  • Weight: .5oz
  • Height: 27mm
  • Width: 22mm
  • Length: 75mm
  • Material: Fiber filled 30% polymer
  • Finish: EDM Texture

Package Includes:

  • 1X - Link Anchor
  • 2X - Sets of LINK Screw & Nut
  • 1X - 3/32 HEX Tool
(1) Strike Industries AR-15 Enhanced Ultimate Dust Cover

The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!
NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original to be compatible with all AR15 receivers on the market and at the same time makes it even lighter weighing in at only 0.3oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal then ever before! The patent pending UDC-E (Ultimate Dust Cover- Enhanced Version) is the modified version of the original UDC for mil-spec receivers.

Product Specs
  • Length: 3.46in
  • Weight: .3oz
  • Materials: Polymer
  • Color: Black or FDE

Package includes:
  • 1x Dust Cover
  • 1x Spring
  • 1x Pin

Features:
  • Patent pending spring-loaded, internal detent rod for easy installation and take-down.
  • Constructed with lightweight durable polymer material weighing in at only .3oz!!!
  • Cut-out window for easy disassembly on any AR15 receiver!
  • Will never corrode rust or fade
  • Will never deform or get bent out of shape
  • Comes in a variety of designs
  • Patent pending "True Seal" internal lip that seals the port tighter than traditional dust cover designs.
  • Built-in adjustable detent set screw to compensate for wear on the receiver.
Product Codes:
SI-AR-UDC-E-01-223-BK
SI-AR-UDC-E-01-223-FDE
SI-AR-UDC-E-FLAG-BK
SI-AR-UDC-E-FLAG-FDE
SI-AR-UDC-E-03-223-BK
SI-AR-UDC-E-03-223-FDE

Strike Industries AR-15 Ultra Light Pivot / Takedown Pins Strike Industries AR-10 Ultimate Dust Cover - 308 - Standard Strike Industries AR-15 Forward Assist
Strike Industries AR-15 Ultra Light Pivot / Takedown Pins
MSRP: $15.95
Sale Price: $14.95
JoeBob dun saved you $1.00!
Strike Industries AR-10 Ultimate Dust Cover - 308 - Standard
MSRP: $16.95
Sale Price: $15.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Forward Assist
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
The Strike Industries Ultra Light Pivot / Takedown Pins are designed to for those looking to build the lightest AR-15 possible. They are CNC machined from 7075 aluminum making them durable and much lighter than the pins found in a standard lower receiver parts kit.

Features:
  • Extended Pivot Pin Length: 1.31"
  • Extended Takedown Pin Length: 1.08"
  • Weight: 0.20 oz net, 0.46oz gross
  • Ultra Light, 7075 aluminum construction.
  • Extended grasping surface
  • Colorline anodized finish
Product Codes:
SI-AR-UL-EPTP-BK
SI-AR-UL-EPTP-BLU
SI-AR-UL-EPTP-RED
SI-AR-UL-EPTP-FDE
The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!

NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original weighing in at only 0.4oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal than ever before!


Package includes:
  • 1x Dust Cover
  • 1x Spring
  • 1x Pin

Features:
  • Patent pending spring-loaded, internal detent rod for easy installation and take-down.
  • Constructed with lightweight durable polymer material
  • Will never corrode rust or fade
  • Will never deform or get bent out of shape
  • Comes in a variety of designs
  • Patent pending, True Seal internal lip that seals the port tighter than traditional dust cover designs.
  • Built-in adjustable detent set screw to compensate for wear on the receiver.

Note:for the AR-10 308
The SI UDC has been tested and fits on Mega Arms MATEN, DPMS Oracle, SIG 716, YHM, and SW perfectly. It is easily modified to fit other receivers with light sanding.
The 308 UDC-E is not guaranteed to fit all receivers nor be able to be modified to fit due to there being no standard for the AR10 platform.

Product Codes:
SI-AR-UDC-E-308-BK
SI-AR-UDC-E-308-FDE
(1) Strike Industries AR-15 Forward Assist

Strike Industries is proud to offer our very own Mil-Spec Forward Assist Assembly for the AR15/M16/M4. Complete with spring and roll pin. This product is manufactured from high strength carbon steel and is head treated. Perfect for upgrading your existing component or replacing worn or broken parts.

Package Includes:
  • Bolt assist tool

Features:
  • Includes the roll pin and spring
  • Made of heat treated, high strength carbon steel
Product Codes:
SI-AR-FA-BK
SI-AR-FA-GC
SI-AR-FA-CC
Strike Industries AR-15 Fang Billet Aluminum Trigger Guard Strike Industries M-LOK Angled Vertical Grip with Cable Management - Short Strike Industries AR-15 Strike Forward Assist
Strike Industries AR-15 Fang Billet Aluminum Trigger Guard
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
Strike Industries M-LOK Angled Vertical Grip with Cable Management - Short
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Strike Forward Assist
MSRP: $18.95
Sale Price: $17.95
JoeBob dun saved you $1.00!
The Strike Industries Fang billet AR-15 trigger guard features the same Fang feature found on their polymer trigger guards, but in a more durable package. The Fang helps to guide the magazine into the magazine well allowing for faster, and more consistent reloads.

Contents:
  • Cobra Aluminum Trigger Guard
  • Roll Pin
  • (4) M3 hex screw

Features:
  • Aircraft grade aluminum construction
  • Magazine reload assist
  • Cleaner, faster reloads
  • Lightweight (.4 oz with included hardware)
The Strike Industries Angled Vertical Grip with Cable Management is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails. No messy wires.

Package Contents:

  • x1 Angled Vertical Grip
  • x2 #8-32x0.3" screw
  • x2 M-LOK nut
  • x1 Torx key
  • x1 Loctite® Threadlocker Blue 242®

Product Features:

  1. 86° grip angle
  2. Built-in cable management w/ excess wire storage (patent pending)
  3. Forward angle provides more of a natural wrist angle and increased rigidity of forearm
  4. Side cuts at top of grip for pressure switch cable routing
  5. Low-profile design to minimize snags
  6. Can be mounted in either direction for preferred setup
  7. Textured palm and finger areas with flat sides for better weapon manipulation control
  8. Made from durable and lightweight polymer
  9. For M-LOK rails
(1) Strike Industries AR-15 Strike Forward Assist

The New Strike forward assist is the latest addition to the Strike Industries line of performance AR parts. The Forward Assist Plunger is made of lightweight aluminum for those looking to retain the functionality of a forward assist, while seeking weight savings wherever they can. The forward assist pawl is constructed of tool steel to ensure positive engagement of the forward assist ratchets on compatible bolt carriers and maintain long service life.

Package includes:
  • 1x Forward Assist Plunger
  • 1x Forward Assist Pawl (Installed)
  • 1x Forward Assist Spring (Installed)
  • 1x Forward Assist Spring Pin

Features:
  • Lightweight at only 0.2oz
  • Anodized Red Line color
  • Increased corrosion resistance
Product Codes:
SI-AR-S-FA-BK
SI-AR-S-FA-BLU
SI-AR-S-FA-RED
Strike Industries Glock Gen 3 Modular Guide Rod Strike Industries Glock Slide Plate V1 Strike Industries Glock Slide Plate V2
Strike Industries Glock Gen 3 Modular Guide Rod
MSRP: $19.95
Sale Price: $18.95
JoeBob dun saved you $1.00!
Strike Industries Glock Slide Plate V1
MSRP: $22.95
Sale Price: $19.95
JoeBob dun saved you $3.00!
Strike Industries Glock Slide Plate V2
MSRP: $22.95
Sale Price: $19.95
JoeBob dun saved you $3.00!
The SI Modular Guide Rod for Gen 3 Glocks is a stainless steel, customizable system that accepts any aftermarket Glock Spring as well as Strike Industries custom recoil spring weights. Its stainless steel shaft and anodized aluminum end cap will not rust, crack or break as easily as polymer rods found in OEM Glock pistols, increasing its service life compared to standard recoil assemblies. Fine tune your Glocks recoil characteristics and improve reliability by using our Glock recoil springs offered in various weights without having to buy more than one guide rod. Simply unscrew the endcap, replace the spring to your preference, replace the end cap and you're good to go!

Product Specifications:
  • Shaft ID: 0.223
  • OD: 0.41
  • Length: 3.10 (without shims)

Contents:
  • 1x GMGR : SUS303
  • 3x endcaps: 7075 T6 Aluminum
  • 2x 0.2mm shims: SUS304
  • 1x 0.4mm shims: SUS304

Instructions: The varieties of included shims are to ensure the guide rod fits a wide variety of Glock slides. Begin with just the 0.4mm shim and test for fit and function. the shims also change how flush the end cap is to the front of the slide.

Compatibility:


Fits G17,17L,22,24,31,34,35,37

Features:

  • Easily swap different spring weights.
  • Made from 303 Stainless Steel for corrosion resistance and increased toughness.
  • Adjustable fit with the included shims even allows compatibility with the Strike Jitterplug Glock Gen 3 upgrade.
  • Endcaps available in 4 different colors, and 3 different designs.

NOTE: These are Gen 3 size Glock Guide Rods.
NOTE: Very light reduced power springs may not function 100% in stock platforms when feeding from reduced capacity magazines.
NOTE: Use of medium strength thread locker to the endcap threads during installation is highly recommended.

The Strike Industries Slide Cover Plate for GLOCK is perfect for those who are looking for an aesthetic and functional upgrade to their GLOCK pistols. The SI Slide Cover Plate for GLOCK allows for tool-less disassembly of the firing pin and extractor using a (patent-pending) push-button design for greater ease of maintenance. Machined from aircraft grade aluminum and anodized, the SI Slide Cover Plate is significantly more durable than the factory plastic slide plate.

Package Includes:
  • 1X Slide Plate for GLOCK
  • 1X Slide Cover Plate Button

Features:
  • Push-button design (Patent Pending)
  • Tool less disassembly of GLOCK slide
  • Fits GLOCK models 17-39
  • Customize color match on Cover Plate and Cover Plate Button
  • NOT FOR G42/43
Product Codes:
SI-GSP-V1-BK
SI-GSP-V1-RED
SI-GSP-V1-BLU

The Strike Industries Slide Cover Plate for GLOCK is perfect for those who are looking for an aesthetic and functional upgrade to their GLOCK pistols. The SI Slide Cover Plate for GLOCK allows for tool-less disassembly of the firing pin and extractor using a (patent-pending) push-button design for greater ease of maintenance. Machined from aircraft grade aluminum and anodized, the SI Slide Cover Plate is significantly more durable than the factory plastic slide plate.

Package Includes:
  • 1X Slide Plate for GLOCK
  • 1X Slide Cover Plate Button

Features:
  • Push-button design (Patent Pending)
  • Tool less disassembly of GLOCK slide
  • Fits GLOCK models 17-39
  • Customize color match on Cover Plate and Cover Plate Button
  • NOT FOR G42/43

Product Codes:
SI-GSP-V2-BK
SI-GSP-V2-BLU
Strike Industries AR-15 Shift Removable Pivot / Takedown Pins Strike Industries Cobra Tactical Fore Grip Strike Industries LINK 6 Slot Rail Section
Strike Industries AR-15 Shift Removable Pivot / Takedown Pins
MSRP: $21.95
Sale Price: $19.95
JoeBob dun saved you $2.00!
Strike Industries Cobra Tactical Fore Grip
MSRP: $25.00
Sale Price: $20.00
JoeBob dun saved you $5.00!
Strike Industries LINK 6 Slot Rail Section
MSRP: $22.95
Sale Price: $20.95
JoeBob dun saved you $2.00!
The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate, and remove the pins as shown. This new design combined with our enhanced detent pins retained inside the pin springs assist in making assembly and disassembly an almost effortless task with minimal tools and effort.

The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.

Product Specifications:

Size:
  • Pivot Pin:Length: 1.31”
  • Take Down Pin:Length: 1.08”
  • Weight (set): 0.52oz
  • Gross Packaged Weight: 0.7oz

Materials:
  • CNC Steel


Finish:
  • Black: Black oxide
  • Gold: Gold plating
  • Chrome: Chrome Plating

Contents:
1x Pivot Pin
1x Takedown Pin

Features:
  • Less steps needed to remove pins
  • Eliminates the need for a pin punch.
  • Locks into place securely. Innovative QD rotation feature
  • Nearly tool less assembly and removal
  • Combine with the enhanced detent pins for easier assembly and removal
  • Quick rifle assembly and disassembly
  • Improved corrosion resistance

Note: Designed around Forged Mil-Spec receivers. May not fit some billet lower receivers.

Product Codes:
SI-AR15-SHIFT-BK
SI-AR15-SHIFT-GC
SI-AR15-SHIFT-CC
The Strike industries cobra grip was developed using innovation and feedback from combat veterans. The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra "hood". It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight. Shooters from all walks of life and different size hands can use the Strike Industries Cobra Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. It is very ergonomic and economical.

Product Codes:
SI-CTFG-BK
SI-CTFG-FDE
Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.

Product Spec:
  • Length: 2.55"
  • Width: 0.83"
  • Height: 0.36"
  • Weight: 0.8oz (without screws and nuts)
  • 1.0oz (including screws and nuts)
  • Materials: Aluminum

Package Includes:
  • Link-RS-6: 1 x rail section 6 slots

Features:
  • Quickly attached from the outside of the handguard.
  • 6061 Aluminum construction
  • Black hard anodizing finish
  • Fits both KeyMod and M-Lok mounting surfaces.
  • Easy installation and removal
Product Codes:
SI-LINK-RS-6-BK
SI-LINK-RS-6-RED
Strike Industries LINK 7 Slot Rail Section W/ QD Mount Strike Industries AR-15 Cobra Billet Aluminum Trigger Guard Strike Industries Glock Gen 4-5 Modular Magazine Release
Strike Industries LINK 7 Slot Rail Section W/ QD Mount
MSRP: $24.95
Sale Price: $22.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Cobra Billet Aluminum Trigger Guard
MSRP: $23.95
Sale Price: $22.95
JoeBob dun saved you $1.00!
Strike Industries Glock Gen 4-5 Modular Magazine Release
MSRP: $24.95
Sale Price: $22.95
JoeBob dun saved you $2.00!
Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.


Product Spec:
  • Length: 3.4"
  • Width: 0.83"
  • Height: 0.36"
  • Weight: 0.8oz (without screws and nuts)
  • 1.0oz (including screws and nuts)
  • Materials: Aluminum

Package Includes:
  • Link-RS-7-QD: 1 x rail section 7 slots with QD


Features:
  • Quickly attached from the outside of the handguard.
  • 6061 Aluminum construction
  • Black hard anodizing finish
  • Fits both KeyMod and M-Lok mounting surfaces.
  • Easy installation and removal
Product Codes:
SI-LINK-RS-7-QD-BK
SI-LINK-RS-7-QD-RED
The Strike Industries Cobra billet AR-15 trigger guard features the same Fang feature found on their polymer trigger guards. The Cobra's hood acts as an indexing point for your trigger finger.

Contents:
  • 1x Cobra Aluminum Trigger Guard
  • (4) M3 hex screw

Features:
  • Aircraft grade aluminum construction
  • Magazine reload assist
  • Cleaner, faster reloads
  • Functions as safe trigger finger index rest
  • Lightweight
Product Codes:
SI-BTG-COBRA-BK
SI-BTG-COBRA-RED
The Strike Industries Mag Release for the Gen 4 GLOCK™ is a new modular upgrade for the GLOCK™ Gen 4. Included are two push buttons that are easily interchangeable. Both button faces are CNC milled from 6061 Aluminum, with mag release internal mechanism made from high density polymer that provides smooth ejection.

Compatible with Glock Gen4 & Gen5 17 | 19 | 22 | 23 | 26 | 27 | 31 | 32 | 33 | 34 | 35 | 37 | 38 | 39

Does not fit Glock 36 | 42 | 43

Product Features:
  • Includes two interchangable button heads
  • Agressive texturing on push pad to prevent slippage
  • Hybrid design with anodized aluminum and polymer body bar
  • Main body designed with polymer to minimize wear and tear on magazine retention cut outs and polymer pistol body

Package Includes:
  • 1 x Mag Release (polymer)
  • 1 x Mag Release button 1 (aluminum)
  • 1 x Mag Release button 2 (aluminum)
  • 1 x M2 Screw
Strike Industries S3 Sling with Kevlar Loop Strike Industries AR-15 Billet Ultimate Dust Cover - 223/5.56 Strike Industries AR-15 Latchless Ambidextrous Charging Handle
Strike Industries S3 Sling with Kevlar Loop
MSRP: $28.95
Sale Price: $25.95
JoeBob dun saved you $3.00!
Strike Industries AR-15 Billet Ultimate Dust Cover - 223/5.56
MSRP: $29.95
Sale Price: $27.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Latchless Ambidextrous Charging Handle
MSRP: $35.95
Sale Price: $32.95
JoeBob dun saved you $3.00!
When Strike Industries began the design and development of the S3 Silent Strategic Sling they meticulously researched with the intent of creating a one of a kind sling system that gave the user both the strength and flexibility they require, coupled with seamless stealthy operational functions. Thus, they constructed a Nylon based sling with Kelvar loop attachments that cancel out any noise from friction of contact points. They've also added nylon covering over the YKK Hamerloc buckles to mask the sound of a quick detachment. We've put the sling through a series of rigorous stress tests to give the user powerful sling attachments that can withstand over 300 lbs of force without giving away any pliability. The S-3 is designed for optimal comfort, strength, and the guaranteed retention of the element of surprise!


Features:
  • Nylon webbing is 1000D.
  • Kevlar loop attachment points, can withstand more than 300lbs of force
  • YKK Hamerloc buckles
  • Double Stitched for added reinforcement
  • Easily adjusts to be used as a two point sling or one point sling
  • Buckles are covered to conceal any sound or any light reflection
Product Codes:
SI-S3-SLING-BK
SI-S3-SLING-CM
Introducing the next iteration of our Ultimate Dust Cover Line... Billet UDC. Featuring our quick detach mechanism that allows you to install or remove the dust cover in under 10 Seconds. It also includes an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power. Our patent pending noise-reduction padding also makes it nearly 100% silent during activation. Now available in heavy duty machined billet aluminum construction and in 4 anodized color lines (black, red, blue and FDE). Sleek, stylish, each to use, and durable. The Strike Industries Billet Ultimate Dust Cover the essential upgrade to your existing dust cover.



Package includes:
  • 1x Billet ultimate dust cover
  • 1x Pack of 4 rubber pads


Features:
  • Available in Red, Blue, FDE, and Black
  • Quick and easy installation/removal
  • Built in double seal for improved debris prevention
  • Solid Billet Aluminum construction for durability



*Will not properly fit Aero Precision M4E1 upper receivers.
* Will not properly function with the Lantac E-BCG due to carrier and bolt design.
The Strike Latchless Charging Handle represents yet another step forward for the AR 15. Simple in its execution, yet robust and reliable, the revolutionary Strike Latchless Charging Handle offers forged 7075 construction, efficient side gas venting, and a solid, comfortable interface for the user. Reliable receiver lockup is achieved through a novel hidden spring mechanism that uses the Charging Handle insertion slot in the upper receiver charging handle channel. This channel features a natural radius that will not wear rapidly like the external, 90-degree edge of the standard CH latch area of the upper receiver. The flat spring bearing surface is much larger than a steel ball bearing, spreading force and wear out over a larger area. Increased service life is one benefit of this type of system, as is the comfort and peace of mind that come from a lack of moving or external components that can break or snag/catch on your gear and foreign objects.

NOTE: For standard mil-spec AR15 only. Not rated for suppressors and /or full auto fire. Not for use on SBRs or pistol length barrels (<14.5")

Package includes:
  • 1x Ambi Charging Handle (Previously known as the "Phantom" charging handle


Features:
  • Improved service life over competing designs.
  • Ambidextrous architecture.
  • Simple, sleek, snag free design.
  • High-efficiency Gas Vents.
  • 7075 Forged Aluminum Construction.
Product Codes:
SI-AR-SLCH-BK
SI-AR-SLCH-FDE
SI-AR-SLCH-BLU
SI-AR-SLCH-RED
SI-AR-SLCH-GRY
Strike Industries AR-15 Extended Latch Charging Handle Strike Industries LINK Curved Foregrip Strike Industries AR-15 Carbine Length Pistol Buffer Tube
Strike Industries AR-15 Extended Latch Charging Handle
MSRP: $39.95
Sale Price: $35.95
JoeBob dun saved you $4.00!
Strike Industries LINK Curved Foregrip
MSRP: $37.95
Sale Price: $35.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Carbine Length Pistol Buffer Tube
MSRP: $45.95
Sale Price: $43.95
JoeBob dun saved you $2.00!
The new ARCH-EL Charging Handle from Strike Industries is a T-6 7075 forged hard anodized charging handle featuring a larger aluminum latch surface that functions with ease in adverse conditions. The SI ARCH-EL featuring the SI Extended Latch, only one on the market made of aluminum, will not wear your receiver as fast compared to any other steel latch! With its high polished surface, its ergonomic design makes for a smooth, clean charge. The quality of the ARCH-EL is second to none and it's built for durability. Once you place the ARCH-EL on your rifle, you will see, feel, and know the quality of the ARCH-EL!

Package include
  • 1 x Charging Handle with Extended Latch

Features
  • Enlarged Extended Grasping Surface for Smooth Operation under Extreme Conditions
  • Traditional Concealed Latch Co-existed with the SI ARCH for Normal Operation
  • Aluminum Construction for minimized weight and wont wear your receiver!!!
  • Fits All Standard AR15 Charging Handles with No Gunsmithing Required
Product Codes:
SI-ARCH-EL-BK
SI-ARCH-EL-RED
SI-ARCH-EL-BLU
SI-ARCH-EL-FDE
The Strike Industries LINK-CFG (Curved Fore Grip) design was derived from our Cobra Tactical Fore Grip and features SI's (patent pending) LINK system which is mountable to both M-Lok and Keymod rails. The LINK-CFG is constructed of 6061T6 aluminum- making it ultra-durable for continued use. Using these grips, shooters can apply different techniques to adapt to various scenarios: At the front, a ridged face allows a shooter to brace the rifle without worrying about the grip moving around. At the rear of the grip, the curve can be used as a hand stop. The innovation in this grip will keep you happily stabilized throughout your shooting experience.

Product Specs
  • Hight: 1.74"
  • Width: .55"
  • Lenth: 4.83"
  • Weight: 1.7 oz
  • Package includes
  • 1xLINK CFG
  • 1x Screw and Nut set

Features
  • Direct mountable to both M-Lok and Keymod.
  • Lightweight, durable aluminum design
  • Multiple ergonomic and functional grip options
  • Billet 6061 aluminum
  • Designed to offer barricade stop functionality
Product Codes:
SI-LINK-CFG-BK
SI-LINK-CFG-GRY
SI-LINK-CFG-RED
The Strike Industries Carbine length Pistol receiver extension is designed to be a serious piece of hardware for the end user that isn’t willing to accept second best materials for their firearms. While some other brands may consider AR pistols as a range toy, we at Strike Industries believe there is a serious role for AR pistol PDWs, and should have hardware to match.

The pistol receiver extension features a supported, anti-rotation buffer retaining plunger. Machined from 7075-T6 aluminum construction, the CARPRE offers much greater strength than your standard 6061 tubes. A convenient sling swivel is machined into the back to facilitate “push-pull” operation.

The Slick Version features an all-around smooth profile to mount other popular aftermarket pistol braces as well as our Strike Industries Viper Pistol Stabilizer.
The Rail Version has an integrated picatinny rail for rear monopod support or to store extra parts or picatinny storage solutions.

Material:
  • 7075-T6 Aluminum

Package includes:

  • 1x Slick Carbine Pistol Receiver Extension

Features:
  • Type II Anodized in FDE, RED, BLUE
  • Type III Anodized in BLACK
  • Fits onto any standard AR receiver.
  • Supported buffer retainer
  • Built-in QD socket at rear