You are here: Home > Base MOA > 0 MOA
Sort By:
Page of 1
Thompson Center Arms - Encore Picatinny Rail Scope Mount (46900 / 46902) Thompson Center Arms - Contender Picatinny Rail Scope Mount (46800 / 46802) EGW Browning BAR / BLR Long Action Picatinny Rail Scope Mount - (43500 / 43502)
Thompson Center Arms - Encore Picatinny Rail Scope Mount (46900 / 46902)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
Thompson Center Arms - Contender Picatinny Rail Scope Mount (46800 / 46802)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
EGW Browning BAR / BLR Long Action Picatinny Rail Scope Mount - (43500 / 43502)
MSRP: $29.99
Sale Price: $26.99
JoeBob dun saved you $3.00!
Our Thompson Center Encore mount is made specific to the gun, and will fit both pistols and rifles.

Also fits the Thompson Center Pro Hunter, and the Pro Hunter FX Muzzleloader.

This Mount May Not Fit:
Encore Turkey

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware:
  • Center Spread: .838"
  • Overall Length: 5.488"
  • Height: 0.4"

Product Codes:
0 MOA - 46900
20 MOA - 46902
Our Thompson Center Contender mount is made specific to the gun, and will fit both rifles and pistols

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

EGW machines these in their shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: .838"
  • Overall Length: 5.488"
  • Height: 0.4"
Product Codes:
0 MOA - 46800
20 MOA - 46802


We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Features:
  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.187"
  • Overall Length: 5.488"
  • Height: .4" (Top of Receiver to Top of Picatinny)
  • Weight: 2 oz.
  • Quick Disconnect Ring Compatible: No
  • Ambidextrous: Yes
  • Torque Specs: 20 in/lbs
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Fitment:
  • Browning BAR (all calibers)
  • Browning BLR Long Action
  • Browning BPR
  • Browning Short Trac
  • Benelli R1** (see below)

**This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- LONG ACTION - 20 MOA - Blemished EGW Winchester 52 Target Picatinny Rail Scope Mount - 0 MOA - Blemished EGW Savage Edge/Axis Picatinny Rail Scope Mount
EGW Winchester 52 Target Picatinny Rail Scope Mount - 0 MOA - Blemished
MSRP: $39.99
Sale Price: $30.99
JoeBob dun saved you $9.00!
EGW Savage Edge/Axis Picatinny Rail Scope Mount - #6 Screws
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
**Blemished** This item may contain cosmetic blems, but otherwise is in functional condition. The item is sold AS-IS with No Returns accepted.

Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount.

Screw Diameters
#6 Screws - .13" diameter
#8 Screws - .16" diameter

Rifles requiring #8 screws (please check your individual rifle to be sure):
10/110 BA Stealth
10/110 Stealth Evolution
110 Scout
110 Wolverine
10 GRS
110 Tactical
110 Tactical LH
110 Tactical Desert
Christensen Arms Ridgeline

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

This mount is available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 4.630"
  • Overall Length: 7.458"

20 MOA - 41102
**Blemished** This item may contain cosmetic blems, but otherwise is in functional condition. The item is sold AS-IS with No Returns accepted.

Our Winchester 52 mount is made specific to the gun.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750" , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

This mount fits:
Kimber 82C
Kimber 82G
H&R M12
Winchester 75
BSA Martini Mk2
BSA Martini MK3
Remington 37
This mount will only work with Anschutz 64 if has the Unertl barrel blocks.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Overall Length: 5.882"
  • Barrel Taper (Win 52): None
The Savage Edge mount is a picatinny style mount custom made and produced by EGW in Quakertown, PA for the new Savage Edge rifle.
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - LONG ACTION EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - SHORT ACTION EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount - SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Savage FB (Flat Back) Picatinny Tactical Rail Scope Mount How To Find The Right Bases For A Savage Centerfire Rifle

Our Savage Flat Back mount works for short action older model Savage rifles that do not have an accu-trigger.

These mounts are available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 3.930" (distance between the two middle holes, center to center, on your receiver.)
  • Overall Length: 6.670"

Models:
0 MOA - 41200
20 MOA - 41202
EGW Savage 93 (1 5/8 Ejection Port) Tactical Picatinny Mount
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- LONG ACTION EGW Savage MK II (1 3/8 Ejection Port) Tactical Picatinny Mount
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage MK II (1 3/8 Ejection Port) Tactical Picatinny Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount How To Find The Right Bases For A Savage Centerfire Rifle

Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount.

Screw Diameters
#6 Screws - .13" diameter
#8 Screws - .16" diameter

Rifles requiring #8 screws (please check your individual rifle to be sure):
10/110 BA Stealth
10/110 Stealth Evolution
110 Scout
110 Wolverine
10 GRS
110 Tactical
110 Tactical LH
110 Tactical Desert
Christensen Arms Ridgeline

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

This mount is available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 4.630"
  • Overall Length: 7.458"

Models:
0 MOA - 41100
20 MOA - 41102
This mount comes standard with a bevel on both sides making it ambidextrous.

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.

Savage MK II mount - 1-3/8" ejection port The Savage MK II mount will also fit the Savage MK I.
If your gun is an older production Mark II, it will have a 1-3/8 ejection port.
New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount.

Please measure the size of your ejection port prior to ordering to ensure the right fit.*

These mounts are available in 0 or 20 MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Center Spread: 3.345"
  • Overall Length: 5.882"

Models:
0 MOA - 41500
20 MOA - 41502
EGW Remington 597 Picatinny Scope Mount EGW Remington 700 Picatinny Tactical Scope Rail Mount- LONG ACTION EGW Remington 700 Picatinny Tactical Scope Rail Mount- SHORT ACTION
EGW Remington 597 Picatinny Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Remington 700 Picatinny Tactical Scope Rail Mount- LONG ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Remington 700 Picatinny Tactical Scope Rail Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
The Remington 597 mount is made specific to the gun.

This mount is available with a 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Mounting
  • Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
  • Torque Specs: 20 in/lbs
  • Overall Length: 6.276"
  • Height: .4"

Models:
0 MOA - 40300
20 MOA - 40302
Remington 700 Picatinny Tactical Scope Rail Mount Remington 700 Picatinny Tactical Scope Rail Mount
EGW NEF/HNR Handi Rifle Picatinny Rail Scope Mount EGW Winchester 52 Target Picatinny Rail Scope Mount EGW Ruger 10-22 Picatinny Rail Scope Mount ( 46100 / 46102)
EGW Winchester 52 Target Picatinny Rail Scope Mount
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Ruger 10-22 Picatinny Rail Scope Mount ( 46100 / 46102)
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
This mount fits the NEF/H&R Handi Rifle, it also fits the H&R Classic Carbine.

This base sits at approximately 0.4” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined From: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Only
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Hole 1 to 2: 1.30"
  • Hole 2 to 3: 1.0"
  • Overall Length of Mount: 6.276"
  • Made in the USA

Models
0 MOA - 46200
20 MOA - 46202
Our Winchester 52 mount is made specific to the gun.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750" , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

This mount fits:
Kimber 82C
Kimber 82G
H&R M12
Winchester 75
BSA Martini Mk2
BSA Martini MK3
Remington 37
This mount will only work with Anschutz 64 if has the Unertl barrel blocks.

Specifications:

  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Overall Length: 5.882"
  • Barrel Taper (Win 52): None
The Ruger 10-22 mount is made specific for the 10-22.

This scope mount will not fit the 10-22 takedown.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: 2.57"
  • Overall Length: 6.276"
  • Height: Approximately 0.4"
  • Type II Anodized
  • Made in the USA

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Models:
0 MOA: 46100
20MOA: 46102

EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION EGW Savage Edge/Axis Picatinny Rail Scope Mount - #8 Screws Warne Mountain Tech Rail Howa 1500 / Weatherby Vanguard - Short Action
EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
EGW Savage Edge/Axis Picatinny Rail Scope Mount - #8 Screws
MSRP: $39.99
Sale Price: $35.99
JoeBob dun saved you $4.00!
Warne Mountain Tech Rail Howa 1500 / Weatherby Vanguard - Short Action
MSRP: $73.95
Sale Price: $39.95
JoeBob dun saved you $34.00!
EGW Ruger American Picatinny Tactical Scope Rail Mount- SHORT ACTION

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

This mount fits:
  • Ruger American Short Action Models
  • Ruger American Standard (In Short Action Calibers)
  • Ruger American Predator
  • Ruger American Compact
  • Ruger American Ranch
  • Ruger American Go Wild Camo (In Short Action Calibers)

Features:
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black
  • Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
  • Center Spread: 3.01"
  • Overall Length: 6.670"
  • Sits at approximately 0.4” high.
How To Find The Right Bases For A Savage Centerfire Rifle

Savage Axis Rifles with serial numbers higher than N936371 are drilled and tapped for #8-40 screws.

Having trouble getting proper eye relief on your bolt action Savage Axis? Our one piece Savage Axis 0 MOA (Drilled for #8-40 Screws) picatinny scope mount can help. Utilizing a multi-slot design, our scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.

This mount is ambidextrous.

These mounts are available in 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount fits:

  • Savage AXIS II (Drilled for #8-40 Screws)
  • Savage AXIS II XP (Drilled for #8-40 Screws)
  • Savage AXIS II Precision (Drilled for #8-40 Screws)
  • Savage AXIS II Precision XP (Drilled for #8-40 Screws)

    This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

    Specifications:
    • Rail Type: One Piece Picatinny
    • Machined from: Domestic 6061 T6 Extruded Aluminum
    • Finish: Matte Black Anodizing
    • Center Spread: 4.321"
    • Overall Length: 7.458"
    • Height: .4" (Top of Receiver to Top of Picatinny)
    • Weight: 2 oz.
    • Quick Disconnect Ring Compatible: No
    • Ambidextrous: Yes
    • Torque Specs: 20 in/lbs
    • Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included

    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    Warne Mountain Tech Rail Savage Round Receiver - Short Action Warne Mountain Tech Rail Savage Round Receiver - Long Action Warne Mountain Tech Rail Remington 700 - Short Action
    Warne Mountain Tech Rail Savage Round Receiver - Short Action
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    Warne Mountain Tech Rail Savage Round Receiver - Long Action
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    Warne Mountain Tech Rail Remington 700 - Short Action
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    Warne Mountain Tech Rail Remington 700 - Long Action Warne Mountain Tech Rail Ruger American Centerfire - Short Action Warne Mountain Tech Rail - Tikka T3
    Warne Mountain Tech Rail Remington 700 - Long Action
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    Warne Mountain Tech Rail Ruger American Centerfire - Short Action
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    Warne Mountain Tech Rail - Tikka T3
    MSRP: $73.95
    Sale Price: $39.95
    JoeBob dun saved you $34.00!
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    "Ounces are pounds, Pounds are pain" The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.

    • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
    • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
    • Bases feature black zinc coated hardware for "Element Proof" protection.
    • Self centering tapered T-15 Torx screws.
    • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
    EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- SHORT ACTION EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- LONG ACTION - #8 Screws EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- LONG ACTION - #8 Screws
    EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- SHORT ACTION
    MSRP: $69.99
    Sale Price: $62.99
    JoeBob dun saved you $7.00!
    EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- LONG ACTION
    MSRP: $69.99
    Sale Price: $62.99
    JoeBob dun saved you $7.00!
    EGW Remington 700 / Bergara Premier HD Picatinny Scope Mount- LONG ACTION - #8 Screws
    MSRP: $69.99
    Sale Price: $62.99
    JoeBob dun saved you $7.00!

    EGW 80000 mounts manufactured after 12/2020 are drilled to accommodate larger diameter screws (#8-40) and now come with #6-48 and #8-40 screws. The head diameter on the #6-48 screws provided with this mount is larger than our normal #6-48 screws.

    If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Remington Customer Support at
    1-800-243-9700 and supply them with your serial number.

    The blue bag of screws provided are #6-48 screws.

    The red bag of screws provided are #8-40 screws.

    Mounting Hardware Is Included

    This mount fits:
    Bergara B14 (#6 Screws)
    Bergara B14R
    Bergara Short Action Premier Series (#8 Screws)
    Christensen Arms Short Action (Please Check Your Serial Number Here)
    CVA Paramount
    CVA Paramount Pro
    Defiance Machine Stryker Ridge Short Action (#8 screws)
    Remington 700 Short Action
    Remington 700 Ultimate Muzzleloader
    Remington 722 Short Action
    Remington 40X Short Action
    Remington 700 Short Action (#8 screws)
    Remington 700 Short Action Police Tactical (#8 screws)
    Remington 700 Short Action LTR (#8 screws)
    Remington 722 Short Action (#8 screws)
    Remington 40x Short Action (#8 screws)

    This mount is too low to work on the Remington 700 PCR.

    Rail Type: One Piece Picatinny
    Machined From:
    Solid 7075 T6 Aircraft Grade Aluminum
    Finish: Matte Black Hardcoat
    Center Spread: 3.627"
    Overall Length of Mount: 6.276"
    Height: .35" (Top of Receiver to Top of Picatinny)
    Weight: 2.5 oz
    Quick Disconnect Ring Compatible: Yes
    Ambidextrous: Yes
    Compatible with Picatinny or Weaver scope rings.
    Mounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit Included
    Torque Specs: 20 in/lbs


    This mount comes standard with a bevel on both sides making it ambidextrous.

    The bolt pattern on our Remington 700 Short Action mount fits Short Action Remington 700 rifles (example 223, 308), as well as the 722 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

    We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

    We recommend:
    0 MOA - if shooting 0-500 yards
    20 MOA - if shooting 500-1000 yards
    30 MOA - if shooting 1000-1500 yards
    40 MOA - if shooting 1500+ yards

    When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

    Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

    The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

    Mounting Hardware is Included

    This mount fits:
    Remington 700 Long Action
    Remington 721 Long Action
    Remington 725 Long Action
    Bergara B14 Long Action (#6 Screws)
    Christensen Arms Long Action
    Mauser M18 (All Calibers)
    Sauer 100 (All Calibers)
    Sauer 101 (All Calibers)

    Rail Type: One Piece Picatinny
    Machined From:
    Solid 7075 T6 Aircraft Grade Aluminum
    Finish: Matte Black Hardcoat
    Center Spread: 4.485"
    Overall Length of Mount: 7.064"
    Height: .35" (Top of Receiver to Top of Picatinny)
    Weight: 2.5 oz
    Quick Disconnect Ring Compatible: Yes
    Ambidextrous: Yes
    Compatible with Picatinny or Weaver scope rings.
    Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
    Torque Specs: 20 in/lbs

    The Bergara Premier and certain Remington 700 models (ie. 700 Police) require the base to be drilled out for #8 screws. Our Remington 700 mounts that are predrilled are only available in our Heavy Duty platform and are available below. If you would like to drill the mount yourself, we do offer a #8 Drill Out Kit which comes with the appropriate drill bit and screws.

    This mount comes standard with a bevel on both sides making it ambidextrous.

    The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

    We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

    We recommend:
    0 MOA - if shooting 0-500 yards
    20 MOA - if shooting 500-1000 yards

    When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

    Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.




    Firearm Brand Bergara, J.P. Sauer, Remington
    Model B14 Long Action, Model 100, 101, Model 700, 721, 725, 40X Long Action
    Scope Mount Color Black Hardcoat Anodized Type III
    Action Length Long Action
    GTIN 841370108916

    This mount comes standard with a bevel on both sides making it ambidextrous.

    We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

    Installation: We recommend 20 inch lbs of torque and a drip of blue Loctite.

    We recommend:
    0 MOA - if shooting 0-500 yards
    20 MOA - if shooting 500-1000 yards

    Features:
    • Rail Type: One Piece Picatinny
    • Machined From: Solid 7075 T6 Aircraft Grade Aluminum
    • Finish: Matte Black Hardcoat
    • Center Spread: 4.485"
    • Overall Length of Mount: 7.064"
    • Height: .35" (Top of Receiver to Top of Picatinny)
    • Weight: 2.5 oz
    • Quick Disconnect Ring Compatible: Yes
    • Ambidextrous: Yes
    • Compatible with Picatinny or Weaver scope rings.
    • Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included
    • Torque Specs: 20 in/lbs
    • Torque Specs: 20 in/lbs

    Fits:
    • Remington 700 Long Action (#8 screws)
    • Remington 700 Long Action Police Tactical (#8 screws)
    • Bergara Premier (#8 Screws)