You are here: Home > Strike Colors > Black
Sort By:
Page of 2
Strike Industries MLOK Rail Cover V1 - 5pcs Strike Industries MLOK Rail Cover V2 - 5pcs Strike Industries AR-15 Fang Series Trigger Guard
Strike Industries MLOK Rail Cover V1 - 5pcs
MSRP: $7.95
Sale Price: $6.95
JoeBob dun saved you $1.00!
Strike Industries MLOK Rail Cover V2 - 5pcs
MSRP: $7.95
Sale Price: $6.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Fang Series Trigger Guard
MSRP: $10.95
Sale Price: $9.50
JoeBob dun saved you $1.45!
The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!

Package Includes:
  • 5x M-Lok rail covers

Features:
  • Made to fit ALL M-Lok mounting surfaces.
  • Ultra-slim textured surface provides extra dexterity and positive weapon control.
  • Aggressive Non-Slip or Non-Reflective surface.
  • Available in Black and FDE.
  • Bi-directional.
  • Sacrificial cover absorbs all impact, protecting your rail system.
  • Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V1-BK
SI-MLOK-COVER-V1-FDE

The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption. If an impact is hard enough, the covers will absorb the full blow, cracking or breaking in the process in order to prevent any transmission of shock to the handguard itself. Easy to replace, these covers ensure your rail will not take impact or scratch damage under a covered area, and allow your rifle to stand up to the harshest abuse you and it will go through!

Package Includes:
  • 5x M-Lok rail covers

Features:
  • Made to fit ALL M-Lok mounting surfaces.
  • Ultra-slim textured surface provides extra dexterity and positive weapon control.
  • Aggressive Non-Slip or Non-Reflective surface.
  • Available in Black and FDE.
  • Bi-directional.
  • Sacrificial cover absorbs all impact, protecting your rail system.
  • Each Kit contains Five (5) matching color M-Lok Panels.
Product Codes:
SI-MLOK-COVER-V2-BK
SI-MLOK-COVER-V2-FDE
If you've ever wanted faster and reliable magazine reloads, practice makes perfect. You aren't gonna be a superstar overnight. But a little help never hurts. This is why Strike Industries has developed the Fang Trigger Guard. Our trigger guard has a stubby magazine assist "fang" that protrudes to allow with quicker and more accurate reload insertion of the magazine. The Fang Trigger Guard is made of high quality polymer and is light weight with a great look and feel that is only matched with its performance. The fang will help guide your magazine into the magwell on a much more dependable basis. It's a simple, helpful guide that can be used from the beginner to the more advanced. You have to get the feel for the timing and mechanics of a quick and clean reload, getting a competitive edge is just the smart thing to do. Try the Strike Industries Fang Trigger Guard and bite back against failed reload attempts.

Package include:
  • 1 x Fang Trigger guard
  • 1 x Roll Pin
  • 1 x Set screw

Features:
  • Nylon reinforced polymer
  • Magazine reload assist
  • Finger rest function
  • Cleaner, faster reloads
  • Use as a finger rest
  • Light weight at .2 oz
Product Codes:
SI-COBRA-FANG-BK
SI-COBRA-FANG-FDE
Strike Industries Enhanced Magazine Plate - +5 Rds - M3 PMAG Strike Industries ISO-Tab Charging Handle Extension Strike Industries AR-15 Extended Pivot / Takedown Pins
Strike Industries Enhanced Magazine Plate - +5 Rds - M3 PMAG
MSRP: $11.95
Sale Price: $10.95
JoeBob dun saved you $1.00!
Strike Industries ISO-Tab Charging Handle Extension
MSRP: $12.95
Sale Price: $11.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Extended Pivot / Takedown Pins
MSRP: $13.95
Sale Price: $12.95
JoeBob dun saved you $1.00!
The Strike Industries Extended Magazine Plate (E.M.P+5 for the PMAG M3) design provides smoother, faster magazine reloading, and handling. It provides multiple functions to include additional 5 round capacity.

Package Includes:
  • 1x Enhanced Magazine Plate +5

Features:
  • Finger groove for enhanced grip and easy pull from mag-well and pouch.
  • Plus 5 round capacity
Product Codes:
SI-EMP-5-BK
SI-EMP-5-FDE
Enhance the speed and effectiveness of the Strike Latchless Charging Handle with the ISO-Tab from Strike Industries. Made out of lightweight but durable 6061-T6 aluminum, the ISO-Tab is built like a tank but without the weight. Improve your reaction time and never miss a beat even under stressful conditions with the combination setup of a latch-less charging handle and extension tab. Choose a one-sided or ambidextrous configuration according to your needs. Featuring an aggressive texturing and a wider surface area to latch onto, never miss a step to get back into the fight.


Features:

  • Enlarged, extended and textured grasping surface for easy and consistent CH manipulations under a variety of conditions.
  • Interchangeable on either side.
  • Available in Black, Blue, Red, and Flat Dark Earth
  • Enhances operation of Strike Latchless Charging Handles
  • Aluminum construction for durability and minimal added weight
  • Included screw for a secure fit.
  • (1) Isotab is included per package. The (1) Isotab can be installed on the right or left side of the Strike Latchless Charging Handles

Note: ONLY compatible with Strike Latch-Less Charging Handle

Note: It is highly recommended to apply threadlocker to the screw before installation.

Product Codes:
SI-ISOTAB-BK
SI-ISOTAB-BLU
SI-ISOTAB-FDE
SI-ISOTAB-RED
Strike Industries Extended Takedown Pins and Pivot Pins are ideal for shooters looking for a custom look and that run multiple upper receivers off of a single lower. Made out of Precision-Machined Steel. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.

Package Includes:
  • 1 x Extended Pivot pin
  • 1 x Extended Take down pin

Features:
  • Eliminates the need for a pin punch.
  • Locks into place securely.
  • Quick disassembly of the rifle.
Note: SI Extended Pivot Pins may not be a good fit for all billet receivers.

Product Codes:
SI-AR-EPTP-BK
SI-AR-EPTP-GC
SI-AR-EPTP-CC
Strike Industries AR-15 Charging Handle Extended Latch Strike Industries AR-15 Strike Magazine Catch Strike Industries Aluminum Base Plate for Glock Magazines
Strike Industries AR-15 Charging Handle Extended Latch
MSRP: $14.95
Sale Price: $12.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Strike Magazine Catch
MSRP: $14.95
Sale Price: $13.95
JoeBob dun saved you $1.00!
Strike Industries Aluminum Base Plate for Glock Magazines
MSRP: $15.95
Sale Price: $13.95
JoeBob dun saved you $2.00!
The new Strike Industries Extended Latch is not only a great addition to the ARCH charging handle, it is a great addition to any standard charging handle and is the first Extended Latch constructed of aluminum to prevent wear on your receiver!!! The SI AR-LATCH ads functionality and an aggressive look to your AR without taking a toll on your bank account. With its ergonomic design it makes for an even smoother charge in extreme conditions. The quality of the Strike AR-LATCH is second to none. Once you place the AR-LATCH on your rifle, you will see, feel, and know the quality of the AR-LATCH!

Package include:
  • 1 x Charging Handle Extended Latch

Features:
  • Enlarged extended grasping surface for smooth operation under extreme conditions
  • AR Latch co-existed with the SI ARCH for enhanced operation
  • Aluminum construction for minimized weight
  • Fits all Standard Mil Spec Charging Handles including the Strike Industry ARCH

Product Codes:
Black: SI-AR-LATCH-BK
Red: SI-AR-LATCH-RED
Blue: SI-AR-LATCH-BLU
The Strike Billet Magazine Catch Assembly features a billet magazine release button. Sculpted from a solid piece of 6061 aluminum, the button offers a functional and aesthetic upgrade to your AR. Deep serrations and ergonomic shape facilitates positive engagement and identification even in the dark or adverse conditions. The blind thread and color anodized options provide for a unique, custom look to your AR.

Note: May not be compatible with all California compliant bullet buttons.

Product Specs

Materials:
  • Magazine Release Button: 6061-T6 aluminum button
  • Enhanced Magazine Catch: Steel
  • Gross wt: 0.6 oz
  • Net wt: 0.4 oz

Package includes:
  • 1x Billet Magazine Release
  • 1x Enhanced Magazine Catch
  • 1x Magazine Catch Spring

Features:
  • Textured for positive feel and manipulation
  • Solid billet aluminum construction
  • Functional and aesthetic upgrade

Product Codes:
SI-AR-SMC-BK
SI-AR-SMC-FDE
SI-AR-SMC-BLU
Enhance your GLOCK™ to be more ergonomic and aggressive in styling with our newly released Aluminum Base Plates.
The added geometrical curves allow a more refined grip on the end of the magazine for a smoother reload. Reload with speed and style because of the added ramp structure to assist in faster removal and easier insertion of your GLOCK™ magazine.

The anodized aluminum magazine base plates weigh 0.4 oz which is super lightweight and add an additional 15mm height

The Strike Aluminum Magazine Base Plates for GLOCK™ are CNC machined from durable 6061-T6 aluminum. As an added bonus, they are legal in all states because they do not add extra rounds to your magazine. A true aesthetic upgrade for any GLOCK™ owner or Competitive Shooter.

The improved angle of our base plate will allow you to stand your magazine upright on any flat surface, creating ease of storage as well as the ability to reload single-handedly on a table or stand.


Features
  • Enhanced Geometry Provides Better Grip
  • Baseplate Shape Adds weight for quicker mag release
  • Made from Ultra-durable 6061-T6 Aluminum
  • Custom Aesthetics for shooter

Specifications

  • Length:40.56mm
  • Width: 30.55mm
  • Height: 11.69mm Weight: .4 oz
  • Finish: Anodized aluminium (Black, Red, Blue, Titan)
  • Compatible with the following Glock models: 17, 17L, 19, 22, 23, 25, 31, 32, 34, 35, 37, 38,
Strike Industries LINK Anchor Polymer Hand Stop Strike Industries AR-15 Enhanced Ultimate Dust Cover - 223 Strike Industries AR-15 Ultra Light Pivot / Takedown Pins
Strike Industries LINK Anchor Polymer Hand Stop
MSRP: $14.95
Sale Price: $13.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Enhanced Ultimate Dust Cover - 223
MSRP: $15.95
Sale Price: $14.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Ultra Light Pivot / Takedown Pins
MSRP: $15.95
Sale Price: $14.95
JoeBob dun saved you $1.00!
The LINK Anchor Handstop is made from a heat resistant polymer that allows comfortable grip in any shooting condition. It has a low profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the handstop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to the fingertips. A true lightweight modification that is not only comfortable , has an aggressive look, and will improve accuracy over time by a stabilizing your grip.

Compatible with all MLOK / Keymod Handguards.


Product Features:
  • Aggressive ergonomic grip with ridges to enhance dexterity
  • Low profile, light weight, heat resistant design
  • LINK attachment system
  • Multi-directional attachment capabilities

Product Specifications:
  • Weight: .5oz
  • Height: 27mm
  • Width: 22mm
  • Length: 75mm
  • Material: Fiber filled 30% polymer
  • Finish: EDM Texture

Package Includes:

  • 1X - Link Anchor
  • 2X - Sets of LINK Screw & Nut
  • 1X - 3/32 HEX Tool
(1) Strike Industries AR-15 Enhanced Ultimate Dust Cover

The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!
NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original to be compatible with all AR15 receivers on the market and at the same time makes it even lighter weighing in at only 0.3oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal then ever before! The patent pending UDC-E (Ultimate Dust Cover- Enhanced Version) is the modified version of the original UDC for mil-spec receivers.

Product Specs
  • Length: 3.46in
  • Weight: .3oz
  • Materials: Polymer
  • Color: Black or FDE

Package includes:
  • 1x Dust Cover
  • 1x Spring
  • 1x Pin

Features:
  • Patent pending spring-loaded, internal detent rod for easy installation and take-down.
  • Constructed with lightweight durable polymer material weighing in at only .3oz!!!
  • Cut-out window for easy disassembly on any AR15 receiver!
  • Will never corrode rust or fade
  • Will never deform or get bent out of shape
  • Comes in a variety of designs
  • Patent pending "True Seal" internal lip that seals the port tighter than traditional dust cover designs.
  • Built-in adjustable detent set screw to compensate for wear on the receiver.
Product Codes:
SI-AR-UDC-E-01-223-BK
SI-AR-UDC-E-01-223-FDE
SI-AR-UDC-E-FLAG-BK
SI-AR-UDC-E-FLAG-FDE
SI-AR-UDC-E-03-223-BK
SI-AR-UDC-E-03-223-FDE

The Strike Industries Ultra Light Pivot / Takedown Pins are designed to for those looking to build the lightest AR-15 possible. They are CNC machined from 7075 aluminum making them durable and much lighter than the pins found in a standard lower receiver parts kit.

Features:
  • Extended Pivot Pin Length: 1.31"
  • Extended Takedown Pin Length: 1.08"
  • Weight: 0.20 oz net, 0.46oz gross
  • Ultra Light, 7075 aluminum construction.
  • Extended grasping surface
  • Colorline anodized finish
Product Codes:
SI-AR-UL-EPTP-BK
SI-AR-UL-EPTP-BLU
SI-AR-UL-EPTP-RED
SI-AR-UL-EPTP-FDE
Strike Industries AR-10 Ultimate Dust Cover - 308 - Standard Strike Industries AR-15 Forward Assist Strike Industries AR-15 Fang Billet Aluminum Trigger Guard
Strike Industries AR-10 Ultimate Dust Cover - 308 - Standard
MSRP: $16.95
Sale Price: $15.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Forward Assist
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Fang Billet Aluminum Trigger Guard
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
The patent pending SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!

NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original weighing in at only 0.4oz!
Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal than ever before!


Package includes:
  • 1x Dust Cover
  • 1x Spring
  • 1x Pin

Features:
  • Patent pending spring-loaded, internal detent rod for easy installation and take-down.
  • Constructed with lightweight durable polymer material
  • Will never corrode rust or fade
  • Will never deform or get bent out of shape
  • Comes in a variety of designs
  • Patent pending, True Seal internal lip that seals the port tighter than traditional dust cover designs.
  • Built-in adjustable detent set screw to compensate for wear on the receiver.

Note:for the AR-10 308
The SI UDC has been tested and fits on Mega Arms MATEN, DPMS Oracle, SIG 716, YHM, and SW perfectly. It is easily modified to fit other receivers with light sanding.
The 308 UDC-E is not guaranteed to fit all receivers nor be able to be modified to fit due to there being no standard for the AR10 platform.

Product Codes:
SI-AR-UDC-E-308-BK
SI-AR-UDC-E-308-FDE
(1) Strike Industries AR-15 Forward Assist

Strike Industries is proud to offer our very own Mil-Spec Forward Assist Assembly for the AR15/M16/M4. Complete with spring and roll pin. This product is manufactured from high strength carbon steel and is head treated. Perfect for upgrading your existing component or replacing worn or broken parts.

Package Includes:
  • Bolt assist tool

Features:
  • Includes the roll pin and spring
  • Made of heat treated, high strength carbon steel
Product Codes:
SI-AR-FA-BK
SI-AR-FA-GC
SI-AR-FA-CC
Form meets function with the Strike Industries line of Aluminum trigger guards. Not only does the sculpted, billet aluminum trigger guard make your rifle stand out from the pack, it also provides real added value over the competition. The Fang feature from our popular polymer trigger guard is retained to help guide the magazine for faster, more consistent reloads.

Contents:
  • Cobra Aluminum Trigger Guard
  • Roll Pin
  • (4) M3 hex screw

Features:
  • Aircraft grade aluminum construction
  • Magazine reload assist
  • Cleaner, faster reloads
  • Lightweight (.4 oz with included hardware)
Strike Industries M-LOK Angled Vertical Grip with Cable Management - Short Strike Industries AR-15 Shift Removable Pivot / Takedown Pins Strike Industries AR-15 Overmolded Ultimate Dust Cover
Strike Industries M-LOK Angled Vertical Grip with Cable Management - Short
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
Strike Industries AR-15 Shift Removable Pivot / Takedown Pins
MSRP: $21.95
Sale Price: $19.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Overmolded Ultimate Dust Cover
MSRP: $22.95
Sale Price: $19.95
JoeBob dun saved you $3.00!
The Strike Industries Angled Vertical Grip with Cable Management is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails. No messy wires.

Package Contents:

  • x1 Angled Vertical Grip
  • x2 #8-32x0.3" screw
  • x2 M-LOK nut
  • x1 Torx key
  • x1 Loctite® Threadlocker Blue 242®

Product Features:

  1. 86° grip angle
  2. Built-in cable management w/ excess wire storage (patent pending)
  3. Forward angle provides more of a natural wrist angle and increased rigidity of forearm
  4. Side cuts at top of grip for pressure switch cable routing
  5. Low-profile design to minimize snags
  6. Can be mounted in either direction for preferred setup
  7. Textured palm and finger areas with flat sides for better weapon manipulation control
  8. Made from durable and lightweight polymer
  9. For M-LOK rails

The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate, and remove the pins as shown. This new design combined with our enhanced detent pins retained inside the pin springs assist in making assembly and disassembly an almost effortless task with minimal tools and effort.

The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.

Product Specifications:

Size:
  • Pivot Pin:Length: 1.31”
  • Take Down Pin:Length: 1.08”
  • Weight (set): 0.52oz
  • Gross Packaged Weight: 0.7oz

Materials:
  • CNC Steel


Finish:
  • Black: Black oxide
  • Gold: Gold plating
  • Chrome: Chrome Plating

Contents:
1x Pivot Pin
1x Takedown Pin

Features:
  • Less steps needed to remove pins
  • Eliminates the need for a pin punch.
  • Locks into place securely. Innovative QD rotation feature
  • Nearly tool less assembly and removal
  • Combine with the enhanced detent pins for easier assembly and removal
  • Quick rifle assembly and disassembly
  • Improved corrosion resistance

Note: Designed around Forged Mil-Spec receivers. May not fit some billet lower receivers.

Product Codes:
SI-AR15-SHIFT-BK
SI-AR15-SHIFT-GC
SI-AR15-SHIFT-CC
The Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 is the next iteration of our Ultimate Dust Cover (UDC). The upgraded UDC design with double injection mold and overmolded rubberized soft sealing lip for better seal to prevent debris and water from entering when the cover is closed. The SI patent pending "True Seal" internal lip seals the port tighter than traditional dust cover designs. The AR Overmolded UDC comes pre-assembled with all the parts needed for a quick tool-less installation and easy disassembly using something as common as a pen or small point. Built into the UDC is an adjustable detent set screw to compensate for wear on the upper receiver. The SI patent pending noise-reduction rubber padding also makes it nearly 100% silent during activation. Made of overmolded high-strength impact resistant custom blended SI Polmer Extreme material, the SI AR Overmolded UDC does not deform or get bent out of shape. Resistant to rust unlike traditional steel covers, if the time ever comes, knowing you can remove and quickly reinstall makes this an easy cost-effective choice. Consider the Strike Industries AR Overmolded Ultimate Dust Cover for .223/5.56 on a new build or when you are going to untorque the barrel nut as this is the easiest time to remove your old stamped steel dust cover to upgrade. Install AND remove any SI UDC in just 5 to 10 seconds.


Package Contents:
  • x1 AR Overmolded Dust Cover
  • x4 Rubber pads

Product Features:

  • Upgraded UDC design with double injection mold and overmolded rubberized seal
  • Quick tool-less installation and easy disassembly using something as common as a pen
  • Patent pending "True Seal" internal lip seals the port tighter than traditional dust cover designs
  • Overmolded soft sealing lip for better seal to prevent debris and water from entering when cover is closed-
  • Built-in adjustable detent set screw to compensate for wear on upper receiver
  • Patent pending noise-reduction rubber padding makes it nearly 100% silent during activation
  • Made of overmolded high-strength SI Polymer Extreme material to not deform or get bent out of shape
  • Resistant to rust unlike traditional steel covers
  • Install AND remove the Overmolded Ultimate Dust Cover in just 5 to 10 seconds

COMPATIBILITY:

  • AR-15 Mil-Spec upper receivers
  • Aero Precision M4E1

NOT COMPATIBLE:
  • Upper Receivers: VLTOR MUR: Modular Upper Receiver and ZRO Delta
  • Lantac Enhanced BCG due to carrier and bolt design
Strike Industries LINK 6 Slot Rail Section Strike Industries Cobra Tactical Fore Grip Strike Industries LINK 7 Slot Rail Section W/ QD Mount
Strike Industries LINK 6 Slot Rail Section
MSRP: $22.95
Sale Price: $20.95
JoeBob dun saved you $2.00!
Strike Industries Cobra Tactical Fore Grip
MSRP: $25.00
Sale Price: $22.95
JoeBob dun saved you $2.05!
Strike Industries LINK 7 Slot Rail Section W/ QD Mount
MSRP: $24.95
Sale Price: $22.95
JoeBob dun saved you $2.00!
Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.

Product Spec:
  • Length: 2.55"
  • Width: 0.83"
  • Height: 0.36"
  • Weight: 0.8oz (without screws and nuts)
  • 1.0oz (including screws and nuts)
  • Materials: Aluminum

Package Includes:
  • Link-RS-6: 1 x rail section 6 slots

Features:
  • Quickly attached from the outside of the handguard.
  • 6061 Aluminum construction
  • Black hard anodizing finish
  • Fits both KeyMod and M-Lok mounting surfaces.
  • Easy installation and removal
Product Codes:
SI-LINK-RS-6-BK
SI-LINK-RS-6-RED
The Strike industries cobra grip was developed using innovation and feedback from combat veterans. The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra "hood". It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight. Shooters from all walks of life and different size hands can use the Strike Industries Cobra Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. It is very ergonomic and economical.

Product Specs:

  • Length: 4”
  • Weight: 1.4 oz


Product Codes:
SI-CTFG-BK
SI-CTFG-FDE
Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.


Product Spec:
  • Length: 3.4"
  • Width: 0.83"
  • Height: 0.36"
  • Weight: 0.8oz (without screws and nuts)
  • 1.0oz (including screws and nuts)
  • Materials: Aluminum

Package Includes:
  • Link-RS-7-QD: 1 x rail section 7 slots with QD


Features:
  • Quickly attached from the outside of the handguard.
  • 6061 Aluminum construction
  • Black hard anodizing finish
  • Fits both KeyMod and M-Lok mounting surfaces.
  • Easy installation and removal
Product Codes:
SI-LINK-RS-7-QD-BK
SI-LINK-RS-7-QD-RED
Strike Industries AR-15 Cobra Billet Aluminum Trigger Guard Strike Industries Glock Gen 4-5 Modular Magazine Release Strike Industries S3 Sling with Kevlar Loop
Strike Industries AR-15 Cobra Billet Aluminum Trigger Guard
MSRP: $23.95
Sale Price: $22.95
JoeBob dun saved you $1.00!
Strike Industries Glock Gen 4-5 Modular Magazine Release
MSRP: $24.95
Sale Price: $22.95
JoeBob dun saved you $2.00!
Strike Industries S3 Sling with Kevlar Loop
MSRP: $28.95
Sale Price: $25.95
JoeBob dun saved you $3.00!
Form meets function with the Strike Industries line of Aluminum trigger guards. Not only does the sculpted, billet aluminum trigger guard make your rifle stand out from the pack, it also provides real added value over the competition. The Cobra’s “hood” provides a hard index point off the trigger for safety, and a convenient rest that is optimally placed for rapid re-engagement. The Fang feature from our popular polymer trigger guard is retained to help guide the magazine for faster, more consistent reloads.

Contents:
  • 1x Cobra Aluminum Trigger Guard
  • (4) M3 hex screw

Features:
  • Aircraft grade aluminum construction
  • Magazine reload assist
  • Cleaner, faster reloads
  • Functions as safe trigger finger index rest
  • Lightweight
Product Codes:
SI-BTG-COBRA-BK
SI-BTG-COBRA-RED
The Strike Industries Mag Release for the Gen 4 GLOCK™ is a new modular upgrade for the GLOCK™ Gen 4. Included are two push buttons that are easily interchangeable. Both button faces are CNC milled from 6061 Aluminum, with mag release internal mechanism made from high density polymer that provides smooth ejection.

Compatible with Glock Gen4 & Gen5 17 | 19 | 22 | 23 | 26 | 27 | 31 | 32 | 33 | 34 | 35 | 37 | 38 | 39

Does not fit Glock 36 | 42 | 43

Product Features:
  • Includes two interchangable button heads
  • Agressive texturing on push pad to prevent slippage
  • Hybrid design with anodized aluminum and polymer body bar
  • Main body designed with polymer to minimize wear and tear on magazine retention cut outs and polymer pistol body

Package Includes:
  • 1 x Mag Release (polymer)
  • 1 x Mag Release button 1 (aluminum)
  • 1 x Mag Release button 2 (aluminum)
  • 1 x M2 Screw
When Strike Industries began the design and development of the S3 Silent Strategic Sling they meticulously researched with the intent of creating a one of a kind sling system that gave the user both the strength and flexibility they require, coupled with seamless stealthy operational functions. Thus, they constructed a Nylon based sling with Kelvar loop attachments that cancel out any noise from friction of contact points. They've also added nylon covering over the YKK Hamerloc buckles to mask the sound of a quick detachment. We've put the sling through a series of rigorous stress tests to give the user powerful sling attachments that can withstand over 300 lbs of force without giving away any pliability. The S-3 is designed for optimal comfort, strength, and the guaranteed retention of the element of surprise!


Features:
  • Nylon webbing is 1000D.
  • Kevlar loop attachment points, can withstand more than 300lbs of force
  • YKK Hamerloc buckles
  • Double Stitched for added reinforcement
  • Easily adjusts to be used as a two point sling or one point sling
  • Buckles are covered to conceal any sound or any light reflection
Product Codes:
SI-S3-SLING-BK
SI-S3-SLING-CM
Strike Industries S3 Sling Pro Padded Sling Strike Industries AR-15 Latchless Ambidextrous Charging Handle Strike Industries AR-15 Ambidextrous Magazine Release
Strike Industries S3 Pro Padded Sling
MSRP: $32.95
Sale Price: $29.95
JoeBob dun saved you $3.00!
Strike Industries AR-15 Latchless Ambidextrous Charging Handle
MSRP: $35.95
Sale Price: $32.95
JoeBob dun saved you $3.00!
Strike Industries AR-15 Ambidextrous Magazine Release
MSRP: $37.95
Sale Price: $33.95
JoeBob dun saved you $4.00!
The S3, Silent Strategic Sling, was created with simplicity and stealth in mind. However, the lightweight sling isn’t always ideal for extended carry, or for heavier weapon systems. For those that don’t mind a little extra bulk, the S3 PRO is perfect for those looking for an ultra comfortable sling. Just like the original S3 Sling, the S3 Pro features silent operations, while adding a padded rear section to distribute weight. Additionally, the S3 PRO features an integrated elastic storage section ideal for tourniquet storage.

Give your shoulder a break with the S3 Pro Padded Sling

Product Specs:
  • Material: 1000D Nylon, 3mm Spacer Mesh
  • Padding: 8mm EVA, 8mm Foam

Webbing:
  • 1" Nylon Tubular webbing
  • 1” Nylon Webbing
  • 6” elastic webbing
  • 1 1/2” elastic webbing
  • 1” elastic webbing

Sling includes:
  • 4mm paracord
  • 1” YKK buckle
  • 1” YKK Ladder adjuster
  • 1” YKK loop
  • 1” YKK tri-bar adjuster

Package includes:
  • 1x S3 PRO Sling

Features:
  • Nylon webbing is 1000D.
  • YKK Hamerloc buckles
  • Double Stitched for added reinforcement
  • Easily adjusts to be used as a two point sling or one point sling
  • Comfortable padded shoulder section
  • Tourniquet storage
The Strike Latchless Charging Handle represents yet another step forward for the AR 15. Simple in its execution, yet robust and reliable, the revolutionary Strike Latchless Charging Handle offers forged 7075 construction, efficient side gas venting, and a solid, comfortable interface for the user. Reliable receiver lockup is achieved through a novel hidden spring mechanism that uses the Charging Handle insertion slot in the upper receiver charging handle channel. This channel features a natural radius that will not wear rapidly like the external, 90-degree edge of the standard CH latch area of the upper receiver. The flat spring bearing surface is much larger than a steel ball bearing, spreading force and wear out over a larger area. Increased service life is one benefit of this type of system, as is the comfort and peace of mind that come from a lack of moving or external components that can break or snag/catch on your gear and foreign objects.
The solid aluminum construction is durable and provides a solid mounting point for the ISO Tabs, an add-on component that increases surface area for those using large optics and/or gloved hands.

NOTE: For standard mil-spec AR15 only. Not rated for suppressors and /or full auto fire. Not for use on SBRs or pistol length barrels (<14.5")

Package includes:
  • 1x Ambi Charging Handle (Previously known as the "Phantom" charging handle


Features:
  • Improved service life over competing designs.
  • Ambidextrous architecture.
  • Simple, sleek, snag free design.
  • High-efficiency Gas Vents.
  • 7075 Forged Aluminum Construction.
Product Codes:
SI-AR-SLCH-BK
SI-AR-SLCH-FDE
SI-AR-SLCH-BLU
SI-AR-SLCH-RED
SI-AR-SLCH-GRY
Introducing the Strike Industries Ambidextrous Magazine Release. The most ergonomic revision of our mag release built to date. The patented Ambi Mag Release allows for seamless ejections from any position.

This improved design drops into any receiver designed to accept a mil-spec magazine catch. Low profile, and ergonomically designed, the mag-catch integrates with most receivers while being very easy to use and will not accidentally activate or interfere with other controls. The package also includes our enhanced Strike Magazine Release button and spring for a complete drop-in upgrade.

For left-handed folks or for those that just want more options, the Strike Ambi-Mag Release is the perfect component to have.

Disclaimer: Designed for receivers that accept mil-spec magazine catches only.

NOT COMPATIBLE WITH ASC OR STAG ARMS GI MAG

Features:
  • Allows ambidextrous activation of the magazine release
  • Drop-In replacement for ambidextrous use
  • Comes with Strike Magazine Release Button and spring
  • Compatible with standard AR15/M16 receiver specs.


Package includes:
  • 1x ambi magazine catch
  • 1x magazine catch spring
  • 1x Strike magazine catch.
Strike Industries AR-15 Extended Latch Charging Handle Strike Industries LINK Curved Foregrip Strike Industries AR-15 Carbine Length Pistol Buffer Tube
Strike Industries AR-15 Extended Latch Charging Handle
MSRP: $39.95
Sale Price: $35.95
JoeBob dun saved you $4.00!
Strike Industries LINK Curved Foregrip
MSRP: $37.95
Sale Price: $35.95
JoeBob dun saved you $2.00!
Strike Industries AR-15 Carbine Length Pistol Buffer Tube
MSRP: $45.95
Sale Price: $43.95
JoeBob dun saved you $2.00!
The new ARCH-EL Charging Handle from Strike Industries is a T-6 7075 forged hard anodized charging handle featuring a larger aluminum latch surface that functions with ease in adverse conditions. The SI ARCH-EL featuring the SI Extended Latch, only one on the market made of aluminum, will not wear your receiver as fast compared to any other steel latch! With its high polished surface, its ergonomic design makes for a smooth, clean charge. The quality of the ARCH-EL is second to none and it's built for durability. Once you place the ARCH-EL on your rifle, you will see, feel, and know the quality of the ARCH-EL!

Package include
  • 1 x Charging Handle with Extended Latch

Features
  • Enlarged Extended Grasping Surface for Smooth Operation under Extreme Conditions
  • Traditional Concealed Latch Co-existed with the SI ARCH for Normal Operation
  • Aluminum Construction for minimized weight and wont wear your receiver!!!
  • Fits All Standard AR15 Charging Handles with No Gunsmithing Required
Note: Not guaranteed to be compatible with Anderson MFG Upper Receivers.

Product Codes:
SI-ARCH-EL-BK
SI-ARCH-EL-RED
SI-ARCH-EL-BLU
SI-ARCH-EL-FDE
The Strike Industries LINK-CFG (Curved Fore Grip) design was derived from our Cobra Tactical Fore Grip and features SI's (patent pending) LINK system which is mountable to both M-Lok and Keymod rails. The LINK-CFG is constructed of 6061T6 aluminum- making it ultra-durable for continued use. Using these grips, shooters can apply different techniques to adapt to various scenarios: At the front, a ridged face allows a shooter to brace the rifle without worrying about the grip moving around. At the rear of the grip, the curve can be used as a hand stop. The innovation in this grip will keep you happily stabilized throughout your shooting experience.

Product Specs
  • Height: 1.74"
  • Width: .55"
  • Length: 4.83"
  • Weight: 1.7 oz

Package includes:
  • 1xLINK CFG
  • 1x Screw and Nut set

Features
  • Direct mountable to both M-Lok and Keymod.
  • Lightweight, durable aluminum design
  • Multiple ergonomic and functional grip options
  • Billet 6061 aluminum
  • Designed to offer barricade stop functionality
Product Codes:
SI-LINK-CFG-BK
SI-LINK-CFG-GRY
SI-LINK-CFG-RED
The Strike Industries Carbine length Pistol receiver extension is designed to be a serious piece of hardware for the end user that isn’t willing to accept second best materials for their firearms. While some other brands may consider AR pistols as a range toy, we at Strike Industries believe there is a serious role for AR pistol PDWs, and should have hardware to match.

The pistol receiver extension features a supported, anti-rotation buffer retaining plunger. Machined from 7075-T6 aluminum construction, the CARPRE offers much greater strength than your standard 6061 tubes. A convenient sling swivel is machined into the back to facilitate “push-pull” operation.

The Slick Version features an all-around smooth profile to mount other popular aftermarket pistol braces as well as our Strike Industries Viper Pistol Stabilizer.
The Rail Version has an integrated picatinny rail for rear monopod support or to store extra parts or picatinny storage solutions.

Material:
  • 7075-T6 Aluminum

Package includes:

  • 1x Slick Carbine Pistol Receiver Extension

Features:
  • Type II Anodized in FDE, RED, BLUE
  • Type III Anodized in BLACK
  • Fits onto any standard AR receiver.
  • Supported buffer retainer
  • Built-in QD socket at rear