You are here: Home > Magpul Colors > Black
Sort By:
Page of 2
Magpul AR-15 MOE Enhanced Polymer Trigger Guard Magpul AR-15 MOE Enhanced Polymer Trigger Guard MAGPUL Picatinny Ladder Rail Panel
Magpul AR-15 MOE Polymer Trigger Guard
MSRP: $8.95
Sale Price: $7.95
JoeBob dun saved you $1.00!
Magpul AR-15 MOE Enhanced Polymer Trigger Guard
MSRP: $9.95
Sale Price: $9.45
JoeBob dun saved you $0.50!
MAGPUL Picatinny Ladder Rail Panel
MSRP: $11.95
Sale Price: $11.50
JoeBob dun saved you $0.45!

The MOE (Magpul Original Equipment) Trigger Guard is a polymer drop-in replacement for the AR15 / M4 weapons platform. The Trigger Guard has an ergonomic and enlarged design to accommodate use with gloves or when shooting in cold environments and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.

All mounting hardware included.

Made in the U.S.A.

The MOE (Magpul Original Equipment) Enhanced Trigger Guard is a polymer drop-in replacement for the AR15 / M4 weapons platform. This upgraded trigger guard is easily installed without the use of specialized tools, using three set screws to secure it to the lower receiver. This eliminates the need to install a roll pin with a hammer and punch and greatly reduces the chance of any damage to the receiver due to improper installation or out-of-spec receivers. The Enhanced Trigger Guard has an ergonomic and enlarged design to accommodate use with gloves or when shooting in cold environments and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.

All mounting hardware included.

Made in the U.S.A.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection.

Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package.

Manufactured by Falcon Industries, Inc.

MAGPUL AR15/M16 M3 PMAG 30rd NON WINDOW MAGPUL MVG MOE Vertical Grip MAGPUL AR15/M16 M3 PMAG 30rd WINDOWED
MAGPUL AR15/M16 M3 PMAG 30rd NON WINDOW
MSRP: $14.95
Sale Price: $13.95
JoeBob dun saved you $1.00!
MAGPUL MVG MOE Vertical Grip
MSRP: $19.95
Sale Price: $16.95
JoeBob dun saved you $3.00!
MAGPUL AR15/M16 M3 PMAG 30rd WINDOWED
MSRP: $17.95
Sale Price: $16.95
JoeBob dun saved you $1.00!
The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

Modified internal and external geometry also permits operation with a wide range of non Colt-spec platforms such as the HK 416 and MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S, and others. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Similar to the MOE PMAG, the GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, an included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage during storage and transit. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.

Made in U.S.A.

FEATURES

  • Next-generation impact and crush resistant polymer construction
  • Modified dimensions allow for wider compatibility with non Colt-spec platforms
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • Long life USGI-spec stainless steel spring
  • Over-travel insertion stop on the spine
  • Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
  • Paint pen dot matrix panels on the bottom of the body to allow for identification marking
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
  • Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit

Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to MOE hand guards without need for rails. The shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.

All mounting hardware included. All mounting hardware included.

NOTE: MOE accessories are not compatible with M-LOK slots.

Made in the USA.

The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

Modified internal and external geometry also permits operation with a wide range of non Colt-spec platforms such as the HK 416 and MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S, and others. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Similar to the MOE PMAG, the GEN M3 Window features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, an included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage during storage and transit. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.

Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel system provides positive verification without affecting the durability or reliability of the magazine.

Made in U.S.A.
Magpul MOE AR15/M16 Grip-Standard Magpul AR15/M4MOE K2 Grip MAGPUL MVG M-LOK Vertical Grip
Magpul MOE AR15/M16 Grip-Standard
MSRP: $22.00
Sale Price: $18.95
JoeBob dun saved you $3.05!
Magpul AR15/M4MOE K2 Grip
MSRP: $20.95
Sale Price: $18.95
JoeBob dun saved you $2.00!
MAGPUL MVG M-LOK Vertical Grip
MSRP: $22.95
Sale Price: $18.95
JoeBob dun saved you $4.00!

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

Made in U.S.A.



Features

  • Replacement for AR15/M4 pistol-grip*
  • One-piece reinforced polymer construction
  • Beavertail backstrap for enhanced ergonomics
  • Positive anti-slip texture
  • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

Specifications

  • MOE Grip
    • Weight, w/hardware: 2.8 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.

*NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.


Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for the AR15 / M4 that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform.

All mounting hardware and a basic grip cap included.

Made in the USA.


NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in the USA.

MAGPUL RLS Rifleman Loop Sling MAGPUL Picatinny RVG (Rail Vertical Grip) MAGPUL AR-15 MOE GRIP PLUS
MAGPUL RLS Rifleman Loop Sling
MSRP: $19.95
Sale Price: $18.95
JoeBob dun saved you $1.00!
MAGPUL Picatinny RVG (Rail Vertical Grip)
MSRP: $24.95
Sale Price: $19.95
JoeBob dun saved you $5.00!
MAGPUL AR-15 MOE GRIP PLUS
MSRP: $23.95
Sale Price: $21.95
JoeBob dun saved you $2.00!
Building on the heritage and proven performance of Magpul™s MS Sling series, the Magpul RLS (Rifleman Loop Sling) is a durable, lightweight, and affordable shooting aid and retention device. Combining the best features of Rhodesian and 1907 match-style slings, the RLS was created with Magpul™s famous proprietary nylon mesh webbing and high-strength polymer hardware.

In a retention role, the RLS serves dutifully as an unobtrusive weapon sling and retention device, securely keeping the rifle tucked behind the shoulder. When called upon, the RLS is rapidly employed with the adjustable forward loop gripping the riflemans support arm, locking in a steady shooting position and firmly planting the rifle butt against the shoulder.

The Magpul RLS was designed with mobility in mind. At a mere 4.4 oz, the optimized weight of the RLS doesnt add unnecessary ounces to the rifle and weighs less than many competing slings and straps. Like all Magpul slings, the RLS has been extensively tested to its limit to ensure reliability and performance in wet, dry, and sandy conditions, to include load and drop testing. Its been hiked with, biked with, swam, climbed, hunted and shot (a lot) with in a variety of field conditions.

The American-made Magpul RLS combines legendary Magpul innovation, quality, and design into a simple and effective shooting aid for less money than many slings that merely carry a rifle.

Features:
  • Proprietary chafe-resistant 1 1/4” nylon mesh webbing
  • Lightweight reinforced high-strength injection-molded polymer hardware
  • Proprietary sling keeper
  • 4.4 oz

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.

Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in the USA.

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.

All mounting hardware included.

Made in the USA.



NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.
MAGPUL  MOE AK + Grip Magpul AR15/M4 MOE K2+ Grip MAGPUL AFG Angled Fore Grip M-LOK
MAGPUL MOE AK + Grip
MSRP: $24.95
Sale Price: $21.95
JoeBob dun saved you $3.00!
Magpul AR15/M4 MOE K2+ Grip
MSRP: $24.95
Sale Price: $22.95
JoeBob dun saved you $2.00!
MAGPUL AFG Angled Fore Grip M-LOK
MSRP: $26.95
Sale Price: $25.60
JoeBob dun saved you $1.35!
The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ Grip is designed to improve ergonomics and weapon control, and borrows the rubber overmolded surface of the popular MOE+ AR15/M4 grip to ensure a positive and comfortable hold on the weapon. Compatible with Magpul Grip Cores for storage customization.
 
All mounting hardware included.
 
Made in U.S.A.

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15 / M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform.

All mounting hardware and a basic grip cap included.

Made in the USA.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.


Made in U.S.A.
MAGPUL AR-15 MOE Fixed Carbine Stock MIL SPEC MAGPUL AR-15 MOE  M-LOK Handguard - Carbine-Impingement or Piston MAGPUL AR-15 MOE SL  M-LOK Handguard - Carbine Length
MAGPUL AR-15 MOE Fixed Carbine Stock MIL SPEC
MSRP: $29.95
Sale Price: $27.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE M-LOK Handguard - Carbine-Impingement or Piston
MSRP: $29.95
Sale Price: $27.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE SL M-LOK Handguard - Carbine Length
MSRP: $34.95
Sale Price: $31.95
JoeBob dun saved you $3.00!

The MOE Fixed Carbine Stock - Mil-Spec model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Mil-Spec size carbine-length buffer tubes.

The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.

Made in the USA.

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

Features

  • Replaces standard M4 Carbine-type plastic hand guards
  • Compatible with most piston-driven as well as 'direct impingement' gas systems
  • Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
  • M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
  • Reinforced, heat-resistant polymer construction
  • Integral riveted aluminum heat shield
  • Front lip and side extensions, shields hand from hot gas block
  • Relieved area at the top rear accommodates many overhanging optic mounts

Specifications

  • MOE M-LOK Hand Guard, Carbine-Length
    • Weight: 6.8 oz.
    • Length, overall: 7.1 in.
    • Length, mounting: 6.6 in.
    • Height, excluding lip: 2.5 in.
    • Width, max: 2.2 in.

NOTE: The MOE M-LOK Hand Guard Carbine-Length is a direct replacement for existing M4 carbine type hand guards and utilizes the existing front hand guard retaining cap and delta ring.

The MOE SL® Hand Guard, Carbine-Length – AR15/M4 for firearms with carbine-length gas systems and an A2 front sight* provides modular flexibility with M-LOK® accessory slots in a lightweight, sleek, cost-effective design. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc.

Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. A large front extension and lower lip protects the user from the hot front sight assembly and maximizes useable hand guard length.



Made in U.S.A.

FEATURES
  • Narrow design replaces bulky M4 Carbine-type plastic hand guards
  • Easy to install utilizing existing delta ring and round front hand guard retaining cap with A2 front sight assembly*
  • Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
  • Reinforced, heat-resistant polymer construction
  • Integral riveted aluminum heat shield
  • Front lip and long side extensions shields hand from hot sight assembly
MAGPUL Picatinny AFG2 Angled Fore Grip 2 MAGPUL MS1 Multi Mission Sling MAGPUL AR-15 MIAD Gen 1.1 Grip Kit Type 1
MAGPUL Picatinny AFG2 Angled Fore Grip 2
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
MAGPUL MS1 Multi Mission Sling
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MIAD Gen 1.1 Grip Kit Type 1
MSRP: $35.95
Sale Price: $32.95
JoeBob dun saved you $3.00!

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Its smaller size allows mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.

Made in the USA.



Features:

* Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub
* Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended)
* All mounting hardware included

Specifications

* AFG2 - Angled Fore Grip
o Weight: 2.53 oz.
o Length: 4.70 in.
o Height, over rail: 1.94 in.
o Width, maximum: 1.37 in.

The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards. The MS1 allows easy shoulder transitions, rapid adjustability for hands-free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter for the sling (such as our Paraclip™, QDM or QD Sling Swivel), you can easily configure your MS1 for your fit and carry needs.

In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.


Like all of our slings, the entire MS1 system is made entirely in the US, and is fully Berry Amendment compliant.
The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 grip. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul Grip Cores to adapt to various storage needs.

This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle.

This TYPE 1 Kit (MAG520) fits most AR receivers. All mounting hardware is included.
MAGPUL AR-15 Midlength MOE M-LOK Handguard MAGPUL AR-15 MOE Mil-Spec Carbine Stock MAGPUL AK47/AK74 MOE Handguard
MAGPUL AR-15 Midlength MOE M-LOK Handguard
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE Mil-Spec Carbine Stock
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
MAGPUL AK47/AK74 MOE Handguard
MSRP: $36.95
Sale Price: $34.95
JoeBob dun saved you $2.00!

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15 / M4 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o\clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc.

Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in the USA.

The MOE Carbine Stock - Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in the USA.

PRODUCT DETAILS

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.
Made in U.S.A.

FEATURES

  • Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
  • Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
  • Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
  • Reinforced, heat-resistant polymer construction
  • Integral, black oxide coated stainless steel heat shield
  • Front lip and long side extensions shields hand from hot barrel while providing increased gripping surface
  • Includes replacement polymer Top Cover
  • Compatible with UltiMAK Optics Mount top cover
  • Accepts factory cleaning rod
MAGPUL AK47/AK74 MOE Handguard MAGPUL AR-15 MOE SL-K Mil-Spec Carbine Stock MAGPUL AR-15 MOE SL  M-LOK Handguard - Mid Length
MAGPUL AK47/AK74 MOE Handguard
MSRP: $36.95
Sale Price: $34.95
JoeBob dun saved you $2.00!
MAGPUL AR-15 MOE SL-K Mil-Spec Carbine Stock
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
MAGPUL AR-15 MOE SL M-LOK Handguard - Mid Length
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
PRODUCT DETAILS

The Magpul MOE AKM Hand Guard is a replacement for original stamped receiver AK-47/AKM/AK-74 pattern rifles with a front sling loop on the hand guard retainer.
Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AKM Hand Guard is an upgrade to any AK pattern rifle.

Made in U.S.A.

FEATURES

  • Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
  • Easy to install utilizing existing front hand guard retaining cap with sling loop*
  • Slots at the three, six, and nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
  • Reinforced, heat-resistant polymer construction
  • Integral, black oxide coated stainless steel heat shield
  • Front lip and side extension shields hand from hot barrel while still allowing use of factory sling loop
  • Includes replacement polymer Top Cover
  • Compatible with UltiMAK Optics Mount top cover
  • Accepts factory cleaning rod
A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock.
Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs.
 
Made in U.S.A.
 
FEATURES

  • Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
  • Sloping cheek weld combines a slim profile with user comfort
  • Dual-side release latch provides easy adjustment while remaining anti-snag
  • Premium chrome-silicon lock spring provides positive locking and long service life
  • Compact rubber butt-pad offers an anti-slip surface and increases impact protection
  • Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
  • Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
  • 1.25" Footman's Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment
The MOE SL Hand Guard for AR15/M4 firearms with mid-length gas system and A2 font sight* provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design.
Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. A large front extension and lower lip protects the user from the hot front sight assembly and maximizes useable hand guard length.

Made in U.S.A.

FEATURES
Narrow design replaces factory 2-piece, mid-length plastic hand guards
Easy to install utilizing existing delta ring and ROUND front hand guard retaining cap with A2 front sight assembly*
Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and long side extensions shields hand from hot sight assembly
    MAGPUL AR-15 MBUS Front Back Up Sight (Gen2) MAGPUL AR-15 MOE M-LOK Handguard Rifle Length MAGPUL MS3 Sling GEN 2
    MAGPUL AR-15 MBUS Front Back Up Sight (Gen2)
    MSRP: $39.95
    Sale Price: $35.95
    JoeBob dun saved you $4.00!
    MAGPUL AR-15 MOE M-LOK Handguard Rifle Length
    MSRP: $39.95
    Sale Price: $37.95
    JoeBob dun saved you $2.00!
    MAGPUL MS3 Sling GEN 2
    MSRP: $49.95
    Sale Price: $47.95
    JoeBob dun saved you $2.00!
    The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.

    An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.

    Made in U.S.A.

    FEATURES
    • Impact resistant polymer construction provides light weight and resists operational abuse
    • Spring-loaded flip up sight easily activated from either side or by pressing the top
    • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
    • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
    • Protective wings shield the spring-locking A2 front sight post
    • Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

    SPECIFICATIONS
    • Weight, w/ hardware: 1.2 oz.
    • Height above rail, stowed: ~0.51 in.
    • Length, stowed: 2.6 in.
    • Length, deployed: 1.5 in.


    ELEVATION ADJUSTMENT

    • ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
    • ~1.2 MOA (1.367"/100m) per click with a 20" sight radius

    The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M16 rifles with rifle-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

    Made in U.S.A.

    Features

    • Replaces standard plastic M16-type rifle-length hand guards
    • Compatible with both 'direct impingement' and most piston-driven gas systems
    • Easy to install utilizing existing delta ring and triangular or round front hand guard retaining cap
    • M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
    • Reinforced, heat-resistant polymer construction
    • Integral riveted aluminum heat shield
    • Front lip and side extensions, shields hand from hot gas block
    • Relieved area at the top rear accommodates most overhanging optic mounts

    Specifications

    • MOE M-LOK Hand Guard, Rifle-Length
      • Weight: 12.1 oz.
      • Length, overall: 12.6 in.
      • Length, mounting: 12.0 in.
      • Height, excluding lip: 2.5 in.
      • Width, max: 2.2 in.

    NOTE: The MOE M-LOK Hand Guard Rifle-Length is a direct replacement for factory-type M16 hand guards and utilizes the existing front hand guard retaining cap and delta ring.
    The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system.

    Used in conjunction with the optional Magpul ASAP® plate, the MS3 sling enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand. The MS3 GEN2 incorporates a new low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

    Features:
    • Light weight yet durable hardware made with hardened steel and heavy-duty polymer
    • Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
    • Steel Paraclip levers are case hardened and finished with a ferritic nitrocarburizing process for extreme resistance to wear and corrosion
    • Custom 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort
    • No tails, loops, or other potential snag hazards
    • Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
    • Fast transition between a single-point sling and two-point sling
    • Symmetrical Paraclip™ shackles allows for easy transition and provides weapon quick-release capabilities in an emergency
    • Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand