You are here: Home > Magpul Colors > Gray
Sort By:
Page of 1
Magpul AR-15 MOE Enhanced Polymer Trigger Guard Magpul AR15/M4MOE K2 Grip MAGPUL Picatinny AFG2 Angled Fore Grip 2
Magpul AR-15 MOE Polymer Trigger Guard
MSRP: $8.95
Sale Price: $7.95
JoeBob dun saved you $1.00!
Magpul AR15/M4MOE K2 Grip
MSRP: $20.95
Sale Price: $18.95
JoeBob dun saved you $2.00!
MAGPUL Picatinny AFG2 Angled Fore Grip 2
MSRP: $34.95
Sale Price: $32.95
JoeBob dun saved you $2.00!

The MOE (Magpul Original Equipment) Trigger Guard is a polymer drop-in replacement for the AR15 / M4 weapons platform. The Trigger Guard has an ergonomic and enlarged design to accommodate use with gloves or when shooting in cold environments and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.

All mounting hardware included.

Made in the U.S.A.

Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for the AR15 / M4 that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform.

All mounting hardware and a basic grip cap included.

Made in the USA.


NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Its smaller size allows mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.

Made in the USA.



Features:

* Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub
* Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended)
* All mounting hardware included

Specifications

* AFG2 - Angled Fore Grip
o Weight: 2.53 oz.
o Length: 4.70 in.
o Height, over rail: 1.94 in.
o Width, maximum: 1.37 in.

MAGPUL AR-15 MOE SL  M-LOK Handguard - Mid Length MAGPUL AR-15 MBUS Front Back Up Sight (Gen2) MAGPUL AR-15 MOE Mil-Spec Carbine Stock
MAGPUL AR-15 MOE SL M-LOK Handguard - Mid Length
MSRP: $39.95
Sale Price: $34.95
JoeBob dun saved you $5.00!
MAGPUL AR-15 MBUS Front Back Up Sight (Gen2)
MSRP: $39.95
Sale Price: $35.95
JoeBob dun saved you $4.00!
MAGPUL AR-15 MOE Mil-Spec Carbine Stock
MSRP: $44.95
Sale Price: $41.95
JoeBob dun saved you $3.00!
The MOE SL Hand Guard for AR15/M4 firearms with mid-length gas system and A2 font sight* provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design.
Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other direct-attach M-LOK accessories for the mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. A large front extension and lower lip protects the user from the hot front sight assembly and maximizes useable hand guard length.

Made in U.S.A.

FEATURES
Narrow design replaces factory 2-piece, mid-length plastic hand guards
Easy to install utilizing existing delta ring and ROUND front hand guard retaining cap with A2 front sight assembly*
Slots at the two, six, and ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK 1913 Picatinny rail sections
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and long side extensions shields hand from hot sight assembly
    The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.

    An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.

    Made in U.S.A.

    FEATURES
    • Impact resistant polymer construction provides light weight and resists operational abuse
    • Spring-loaded flip up sight easily activated from either side or by pressing the top
    • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
    • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
    • Protective wings shield the spring-locking A2 front sight post
    • Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

    SPECIFICATIONS
    • Weight, w/ hardware: 1.2 oz.
    • Height above rail, stowed: ~0.51 in.
    • Length, stowed: 2.6 in.
    • Length, deployed: 1.5 in.


    ELEVATION ADJUSTMENT

    • ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
    • ~1.2 MOA (1.367"/100m) per click with a 20" sight radius

    The MOE Carbine Stock - Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

    The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

    Made in the USA.

    MAGPUL AR-15 MBUS Rear Back Up Sight (Gen2) MAGPUL AR-15 CTR Buttstock Mil-Spec Diameter MAGPUL AR-15 ACS-L Mil-Spec Adaptable Carbine Stock
    MAGPUL AR-15 MBUS Rear Back Up Sight (Gen2)
    MSRP: $59.95
    Sale Price: $54.95
    JoeBob dun saved you $5.00!
    MAGPUL AR-15 CTR Buttstock Mil-Spec Diameter
    MSRP: $64.95
    Sale Price: $59.95
    JoeBob dun saved you $5.00!
    MAGPUL AR-15 ACS-L Mil-Spec Adaptable Carbine Stock
    MSRP: $84.95
    Sale Price: $79.95
    JoeBob dun saved you $5.00!
    The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.

    Made in U.S.A.

    FEATURES

    • Impact resistant polymer construction provides light weight and resists operational abuse
    • Spring-loaded flip up sight easily activated from either side or by pressing the top
    • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
    • Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
    • Protective wings shield the dual, same plane flip apertures
    • Sight can still be folded with either large or small aperture in position
    • Detent knob easily and positively adjusts windage

    SPECIFICATIONS
    • Weight, w/ hardware: 1.3 oz.
    • Height above rail, stowed: ~0.51 in.
    • Center of aperture to top of rail: 1.42 in.
    • Length, stowed: 2.6 in.
    • Length, deployed: 1.5 in.


    WINDAGE ADJUSTMENT
    • ~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
    • ~0.5 MOA (0.547"/100m) per click with a 20" sight radius

    The Magpul CTR (Compact/Type Restricted) - Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

    The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3" thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.



    Made in U.S.A.



    The Magpul ACS-L (Adaptable Carbine Stock - Light) Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.

    Made in the USA.

    MAGPUL AR-15 ACS Mil-Spec Adaptable Carbine Storage Stock
    MAGPUL AR-15 ACS Mil-Spec Adaptable Carbine Storage Stock
    MSRP: $94.95
    Sale Price: $89.95
    JoeBob dun saved you $5.00!

    The Magpul ACS (Adaptable Carbine/Storage) - Mil-Spec model is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.

    Similar to the Magpul CTR®, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and accuracy*. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.



    Made in U.S.A.