The Seekins Precision Adjustable Gas Block lets you to fine tune
your rifle's gas system for smoother cycling and operation. Regulating
the amount of gas used to cycle the action allows tuning the rifle’s
operation to a specific load and the use of low mass bolt carriers,
buffers and springs to reduce felt recoil. This is critical to allow
faster follow up shots, target acquisition and reliability.
The Seekins Precision Adjustable Gas Block is field adjustable.
Operation is easy, simply turn the gas regulating screw in to lessen the
amount of gas and out to add more gas, then use the brass set screw to
lock the setting in place. The overall height of the gas block is 1.37”
with left to right dimensions at .94” to fit under most hand guards and
still have the customization of an adjustable gas block.
Melonite Coated to reduce wear and corrosion for extended periods of
fire, it also makes cleaning easier, as carbon build up will not adhere
to the non-reflective coated surface as much as it does on standard
As with all Seekins Precision products, the Adjustable Gas Block is
covered by the Seekins Precision Lifetime Warranty for the life of the