Home > Gun Parts > Pistol Accessories >

EGW Sig Sauer M17 / M18 Red Dot Sight Adapter Mount - Trijicon RMR / SRO
EGW Sig Sauer M17 / M18 Red Dot Sight Adapter Mount - Trijicon RMR / SRO

Alternative Views:

MSRP: $50.00
Sale Price: $44.99
JoeBob dun saved you $5.01!

Availability: Usually Ships in 24 Hours
Product Code:

Description Learn More
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions

  • Remove the rear sight*
  • Install the EGW Sight Mount in the dovetail
  • Tighten set screw (if applicable)
  • Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  • Apply blue Loctite to the provided mounting screws
  • Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

  • Material: 7075 Aluminum
  • Coating: Matte Black Hardcoat
  • Overall Length: 2.398"
  • Overall Width: .99"
  • Mounting Hardware: (2) 6-32 Flat Head Screws, (2) 4-40 X 1/4 Set Screws
  • Red Dot Fitment: Trijicon RMR / SRO, Holosun HS507C

Browse for more products in the same category as this item:

Gun Parts > Pistol Accessories
Gun Parts > Pistol Accessories > Pistol Sights
Optics & Mounts > Optic Mounts
Optics & Mounts
Gun Parts > Sig Sauer Accessories
All Manufacturers > EGW Mounts