This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
This mount is available in 0 and 20 MOA.
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.
This mount fits:
- Remington 700 Long Action
- Remington 721 Long Action
- Remington 725 Long Action
- Bergara B14 (#6 Screws)
- Christensen Arms Long Action
- Mauser M18
- Sauer 100
- Sauer 101
- Machined from: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black
- Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
- Torque Specs: 20 in/lbs
- Center Spread: 4.485"
- Overall Length: 7.064"
- Height: .395"
0 MOA - 40100
20 MOA - 40102