EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION - 20 MOA

Home > Optics & Mounts > Scope Rails >

EGW Savage RB (Round Back) Picatinny Tactical Rail Scope Mount- SHORT ACTION - 20 MOA - Blemished

MSRP: $39.99

Sale Price: $32.95

JoeBob dun saved you $7.04!

Availability: Usually Ships in 24 Hours

Product Code: EGW-41002-BLEM

Qty:

Description

Learn More

**Blemished** This item may contain cosmetic blems, but otherwise is in functional condition. The item is sold AS-IS with No Returns accepted.

This mount comes standard with a bevel on both sides making it ambidextrous.This Savage base will work with any short action round back Savage rifle with an ejection port. It is also compatible with the Stevens short actions.The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately).

This mount is 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

**Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount.**

Rifles requiring #8 screws (please check your individual rifle to be sure):

10/110 BA Stealth
10/110 Stealth Evolution
110 Scout
110 Wolverine
10 GRS
110 Tactical
110 Tactical LH
110 Tactical Desert
Christensen Arms Ridgeline

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Specifications:

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
Center Spread: 3.930"
Overall Length: 6.670"
Height: .4"

Product Numbers:
20 MOA: 41002

Browse for more products in the same category as this item:

Optics & Mounts > Scope Rails
Optics & Mounts > Scope Rails > Savage & Stevens Scope Rails
Sales! > ***BLEMISHED***
All Manufacturers > EGW Mounts