Home > AR Parts > AR-15 Parts > AR-15 Upper Parts >

JP AR-15/10 Adjustable Gas System
JP AR-15/10 Adjustable Gas System


 
MSRP: $79.95
Sale Price: $77.95
JoeBob dun saved you $2.00!


Availability: Usually Ships in 24 Hours
Product Code: JP-GS-5B

Description Learn More
 
JP Adjustable Gas System for AR-type rifles. Low profile, rail-free design allows installation under hand guards. Material: 416 stainless Finish: Black oxide Weight: 2.25oz Length: 1.28" Bore: .750" bore Height: 1.40"(overall), .775"(over bore) Width: .85" Attachment: 6-32x1/2" socket head screws, T15 Torx drive (included) (includes 5/64x5/16 roll pin for gas tube installation) Adjustment: 8-32x3/8" stainless set screw, 5/64 hex drive (included) *New Locking Adjustment Our Adjustable Gas System is an integral part of our "recoil management" system. Most rifles are over-gassed and the resulting bolt slamming effect is a very significant part of the felt recoil impulse, which impedes sight recovery. We found that controlling the bolt velocity made for a much smoother shooting rifle. This easy-to-install gas manifold allows you to tune your bolt velocity to a particular load and optimize the feel of your rifle. If you enlarge the gas port, it is possible to tune up or down in case you want to use reduced loads or in the case of some very short-barreled AR-15 versions, which are somewhat ammunition sensitive. You may also shut the system off if you don't want to chase brass or give a hot brass shower to your neighbor on the firing line at the range.


Browse for more products in the same category as this item:

AR Parts > AR-15 Parts > AR-15 Upper Parts
AR Parts > AR-15 Parts > AR-15 Upper Parts > AR-15 Gas Blocks
By Manufacturer > JP Enterprises
By Manufacturer > JP Enterprises > Gas System Parts
AR Parts > AR-15 Parts > AR-15 Upper Parts > AR-15 Gas Blocks > .750 AR-15 Gas Blocks
AR Parts > AR-15 Parts > AR-15 Upper Parts > AR-15 Gas Blocks > Adjustable AR-15 Gas Blocks