This IS an NFA item. This WILL require shipping to an FFL with a valid
SOT. ALL ATF laws apply. To see how to order a suppressor, follow this
guide:
How To Guide: Ordering A Suppressor
The OCM6 is a 6mm bore OPS/AE pattern suppressor constructed out of Titanium and Inconel. It is a second generation to the very successful OCM5. By making the inner core of the suppressor from DMLS 3D printed Inconel but keeping the outer tube housing machined Titanium we were able to make it light but strong. Compared to the original OPS 12/AEM5 the OCM6 is 24% lighter (5 oz) without giving up any strength and offering superior erosion resistance.
The biggest improvement of the new OCM6 is backpressure. Historically the OPS 12/AEM5 and then the later OCM5 are very, very quiet suppressors at the muzzle with one drawback – backpressure. The OCM6 sacrifices a little of the muzzle suppression to gain shooters ear suppression and backpressure performance. What does that mean exactly? Let’s say you were standing 10 feet away from somebody shooting an OCM6 VS OCM5 – 10 feet away the OCM5 is going to sound quieter. But to the person SHOOTING the gun the OCM6 is going to sound quieter because it has less port pop. The OCM6 is all about making the shooters experience more enjoyable in both sound and gas management.
Because of the new 6mm bore you are no longer limited to just 5.56 – you can use ANY 6mm round in this suppressor. 6 ARC, 6 Dasher, 6 Creed, 243 Winchester, etc.
And Yes, you can still shoot 5.56/223.
All your old mounts that you used with your OPS/AE or OCM5 suppressor? You can still use them. They are all cross compatible with the new OCM6.
That’s pretty much it, not much to say about it. The OPS 12 and AEM5 have been around for decades, the OCM5 was around for 5 years. This is just taking those suppressors and bringing them into the 21st century with some improvements to current market demands from customers, all while keeping the legendary aesthetics of the original.
If you’re wanting to do a MK12, Gordon or 6 ARC MK12-ish build and don’t want to get gassed out, this is the suppressor for you!
Specs
- Overall length: 8.8”
- Length added: 6.2” (2.6” is reflexed over the barrel)
- Weight: 16 oz
- Material: Hybrid construction of machined Titanium and 3D printed 718 Inconel
- Mounting system: OPS 12 / AEM5, OTB, MWA, PTB
Warranty
Lifetime warranty for all reasonable non negligent use. If you TRY to blow it up by running 10 mags full auto non stop through it or try and shoot a 6.5 Grendel through it, run it over with a lawnmower, etc. we’re not going to cover that for free… sorry. That’s pretty much it. Everything else is covered. Have fun.
