Introducing the new Strike Micro Threaded Comp - QUAD V.
The 'V' stands for vertical as it's designed to kill all vertical movement of the muzzle when firing your handgun. This new and longer compensator's main difference from its original design (the Quad Comp) is that it will work right out of the box with your pistol without any tuning required.
Previously, the original Quad Comp needed some tuning of the guide rod's recoil spring depending on the platform. Additionally, the original Quad focused on killing fore and aft movement, reducing perceived felt recoil.
The new Quad Comp V features two large vertical ports for gas to exit from and despite being 1.44" in length, its aesthetic design aid in weight reduction so this won't feel cumbersome on the user at all when installed.
We tested the new Quad Comp V on a G17 and G19 and saw virtually no muzzle rise. Put it this way, if you've been wanting to build an "Open Division" gun, this is a fantastic muzzle device to get for it!
Package Contents
- 1x MC-V comp
- 1x Flat Head Torx M4x12mm
- 1x T20 Torx tool
- 1x Loctite
Specifications
- Length: 1.44"
- Width: 0.67"
- Height: 0.35"
- Weight: 1.85 oz
Key Features
- Micro compensator for any threaded 9mm handgun barrel.
- Compatible for 1/2"28 thread pitch.
- Two large vertical ports.
- Secure tight fitment and easy timing.
- Aesthetic Strike design and lightweight.
NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems
WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator
Torque: Set screw to exactly 40 in/lbs (4.5 Nm)
NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime set screw is removed before reinstalling
